Re:obd0 to obd1 conversion harness excel files
 

there is something wrong with the write up, im supposed to have 4 wires for the o2, on the write up there are only two.

why dont u recheck that? Im just finished mine but im still strunggling with that part.

Re:obd0 to obd1 conversion harness excel files
 

---- it, just chip your ecu and run uberdata then disable the o2 heater and you will only have to run 1 o2 wire.

Re:obd0 to obd1 conversion harness excel files
 

uhm, thats why i only have one o2 wire, lol!

im going to post a pic of my harness.

Re:obd0 to obd1 conversion harness excel files
 

here you go.

http://bellsouthpwp.net/c/r/crxlover/harness.jpg

Re:obd0 to obd1 conversion harness excel files
 

which wire would be that? Let me get the pinout number pls.

Re:obd0 to obd1 conversion harness excel files
 

It's in the code, not the physical hardware.

Re:obd0 to obd1 conversion harness excel files
 

yeah, but remember that right now im obd1, which one would be the wire going to the o2 sensor off the obd1 plugs?

thats my question, i just want to make sure, i need the pinout number.

Re:obd0 to obd1 conversion harness excel files
 

c14 using the 'top row starting at left is 1,3,5,7 etc' method.

Re:obd0 to obd1 conversion harness excel files
 

cool, c14 is white, thanks a lot.

Re:obd0 to obd1 conversion harness excel files
 

heh i broke my pin on the C-B plug :-X

ohhh well
guess just cut my ----.
too late did it.

NEXT some one make a Custom Engine HArness HOW TO.!!!