Need a bin, didn't found on Xenocron page
#1
Need a bin, didn't found on Xenocron page
I need a good bin for a
stock B16A3
T-bird A/R 48-60
log mani
DSM SMIC
8psi
I am using the "B16AndyFinalTurbo9psi.bin" but around 5K at WOT the car bogs,
i try using the bin "Dyno8_11Feb05-B16A-T3T04-450cc-220whp@6.5psi-11.7afr.bin" but bogs more
i use also the bin "cole is a hardcore ----------e_Stock GSR_ 24 X10 X 2.5 FMIC_ DSM 450cc_ SSAC manifold _ Generic eGay T70 _ stock MAP Tuned to 8 psi" but really sucks.
Please someone post a good bin
stock B16A3
T-bird A/R 48-60
log mani
DSM SMIC
8psi
I am using the "B16AndyFinalTurbo9psi.bin" but around 5K at WOT the car bogs,
i try using the bin "Dyno8_11Feb05-B16A-T3T04-450cc-220whp@6.5psi-11.7afr.bin" but bogs more
i use also the bin "cole is a hardcore ----------e_Stock GSR_ 24 X10 X 2.5 FMIC_ DSM 450cc_ SSAC manifold _ Generic eGay T70 _ stock MAP Tuned to 8 psi" but really sucks.
Please someone post a good bin
#8
Re: Need a bin, didn't found on Xenocron page
try the "Stock B16 , 57 Trim , PTE 440 , Stock Map , 8psi" on xenocrons crome page
http://www.-------------/bins/index.p...Crome/B-Series
lmk how it runs, thinking about trying it since that's really close to my setup
what AFR does your wideband say at the point you bog?
http://www.-------------/bins/index.p...Crome/B-Series
lmk how it runs, thinking about trying it since that's really close to my setup
what AFR does your wideband say at the point you bog?
#9
Re: Need a bin, didn't found on Xenocron page
Originally Posted by marcj
try the "Stock B16 , 57 Trim , PTE 440 , Stock Map , 8psi" on xenocrons crome page
http://www.-------------/bins/index.p...Crome/B-Series
lmk how it runs, thinking about trying it since that's really close to my setup
what AFR does your wideband say at the point you bog?
http://www.-------------/bins/index.p...Crome/B-Series
lmk how it runs, thinking about trying it since that's really close to my setup
what AFR does your wideband say at the point you bog?
Thread
Thread Starter
Forum
Replies
Last Post
ichbinsobose
General Discussion
297
08-02-2007 02:28 PM
Darkelvis
Engine Management
2
12-19-2006 05:59 PM