Need a bin, didn't found on Xenocron page
 

I need a good bin for a

stock B16A3
T-bird A/R 48-60
log mani
DSM SMIC
8psi

I am using the "B16AndyFinalTurbo9psi.bin" but around 5K at WOT the car bogs,
i try using the bin "Dyno8_11Feb05-B16A-T3T04-450cc-220whp@6.5psi-11.7afr.bin" but bogs more
i use also the bin "cole is a hardcore ----------e_Stock GSR_ 24 X10 X 2.5 FMIC_ DSM 450cc_ SSAC manifold _ Generic eGay T70 _ stock MAP Tuned to 8 psi" but really sucks.

Please someone post a good bin :8

Re: Need a bin, didn't found on Xenocron page
 

You're leaving out one of the most important pieces of info: what injectors?

Re: Need a bin, didn't found on Xenocron page
 

you at least need some 390cc injectors. i bet the code he is running is based off the dsm 450's. what injectors do you have again.

Re: Need a bin, didn't found on Xenocron page
 

Both bins say "450cc" fyi.

Re: Need a bin, didn't found on Xenocron page
 

but that doesnt mean he is using 450's....fyi

Re: Need a bin, didn't found on Xenocron page
 

My post was for the TS fyi...

Re: Need a bin, didn't found on Xenocron page
 

Re: Need a bin, didn't found on Xenocron page
 

try the "Stock B16 , 57 Trim , PTE 440 , Stock Map , 8psi" on xenocrons crome page
http://www.-------------/bins/index.p...Crome/B-Series

lmk how it runs, thinking about trying it since that's really close to my setup

what AFR does your wideband say at the point you bog?

Re: Need a bin, didn't found on Xenocron page
 

Tomorrow im going to check this new bin in the car.