I don't know why this might make the chip register as blank, but are starting the burn at the correct offset address?

http://www.moates.net/documentation....entation_id=20

Homdas use a 32k file.

 

i set it up according to the write up on there site, everything is set right as far as i know

 

are your hex numbers like those?

 

nope, these are mine

32k (3276 27SF512 008000 -> 00FFFF

000000 -> 007FFF

 

when i click on the 27SF.. chip option, the codes change to this.
CHIP ADDRESSING
000000 -> 00FFFF

BUFFER ADDRESSING
000000 -> 007FFF

try changing them, that could be it.

 

mine wont even use those numbers... it changes them automaticly when i try to input them

 

The ROM might be faulty.

 

if you mean the burner then i dont think so... if your talking about the map then deffinitly not, i've tried over a dozen diffrent maps, downloaded ones and ones from my own computer

first time dealing with a chip burner so im a little illiterate :1

i guess i'll see if its the chips in a couple days

 

Referring to the actual chip that you are trying to burn a map onto.

 

damn people useing diffrent words...

i ordered two new chips from moates yesterday, so i'll see if it was just the chips in a couple days