Just got my Zeitronix WBO2 ZT2
Arrived today.
09-15-2004, 12:10 PM
#2
1.5 BAR
Join Date: Jun 2003
Posts: 911
Re:Just got my Zeitronix WBO2 ZT2
Let us know how the install goes, and how it works and ----. Did you read my other thread on the zeitronix?
https://www.homemadeturbo.com/forum/...threadid=26807
Mabye you could try out the boost thing and see if it works.
https://www.homemadeturbo.com/forum/...threadid=26807
Mabye you could try out the boost thing and see if it works.
09-15-2004, 01:59 PM
#3
3.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 3,828
Re:Just got my Zeitronix WBO2 ZT2
I'll put a write up on it....
I was thinking about the boost stuff myself...I might put a 2bar map sensor for reading the boost...Maybe the Datalogging software has an option for you to choose the boost settings
I was thinking about the boost stuff myself...I might put a 2bar map sensor for reading the boost...Maybe the Datalogging software has an option for you to choose the boost settings
09-15-2004, 06:00 PM
#6
3.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 3,828
Re:Just got my Zeitronix WBO2 ZT2
I think I may have a solution...going to try it out first...i'll let you guys know if it works.
I made some calculations and I'm think this might work...by changing the voltage going to the map sensor like a hack....note I'm using an additional map sensor for the zeitronix so it won't affect my engine management.
I made some calculations and I'm think this might work...by changing the voltage going to the map sensor like a hack....note I'm using an additional map sensor for the zeitronix so it won't affect my engine management.
09-15-2004, 06:12 PM
#7
1.5 BAR
Join Date: Mar 2003
Posts: 1,190
Re:Just got my Zeitronix WBO2 ZT2
that would be dope! let us know how it turns out. I'm also going to try plugging in my stock map sensor into the boost input on my Zeitronix... see what the readings look like, and if they are even close. For now I have the blue wire on the Zeitronix wb (user input 0-5v) hooked up to the map sensor... the only thing it works for really is seeing when you hit max boost and how consistent it is; good luck on measuring exactly what boost level it's at 
Speaking of that, does anyone have a table listing pressure levels corresponding to map sensor voltages? For the stock 1.75 bar map sensor? It would help alot.
Speaking of that, does anyone have a table listing pressure levels corresponding to map sensor voltages? For the stock 1.75 bar map sensor? It would help alot.
09-15-2004, 06:46 PM
#8
1.0 BAR
Join Date: Jan 2004
Posts: 432
Re:Just got my Zeitronix WBO2 ZT2
Originally Posted by Semnos
I think I may have a solution...going to try it out first...i'll let you guys know if it works.
I made some calculations and I'm think this might work...by changing the voltage going to the map sensor like a hack....note I'm using an additional map sensor for the zeitronix so it won't affect my engine management.
I made some calculations and I'm think this might work...by changing the voltage going to the map sensor like a hack....note I'm using an additional map sensor for the zeitronix so it won't affect my engine management.
, except I hooked my stock map sensor using the user-definer input to see the voltage, the just the proper calculation to get the boost 
09-15-2004, 07:01 PM
#9
1.5 BAR
Join Date: Jun 2003
Posts: 911
Re:Just got my Zeitronix WBO2 ZT2
http://www.honda-tech.com/zerothread?id=988755
If we can learn to read in volts instead of psi we'll all be gravy.
If we can learn to read in volts instead of psi we'll all be gravy.
