Just got my Zeitronix WBO2 ZT2
 

;D Arrived today.

Re:Just got my Zeitronix WBO2 ZT2
 

Let us know how the install goes, and how it works and ----. Did you read my other thread on the zeitronix?

https://www.homemadeturbo.com/forum/...threadid=26807


Mabye you could try out the boost thing and see if it works.

Re:Just got my Zeitronix WBO2 ZT2
 

I'll put a write up on it....
I was thinking about the boost stuff myself...I might put a 2bar map sensor for reading the boost...Maybe the Datalogging software has an option for you to choose the boost settings

Re:Just got my Zeitronix WBO2 ZT2
 

It doesn't. The boost sensor Zeitronix sells is s 3.5 bar sensor. For the boost readings in the software to be accurate, I think you may have to get a 3.5 bar sensor.

Re:Just got my Zeitronix WBO2 ZT2
 

that sucks...ohh well...

Re:Just got my Zeitronix WBO2 ZT2
 

I think I may have a solution...going to try it out first...i'll let you guys know if it works.
I made some calculations and I'm think this might work...by changing the voltage going to the map sensor like a hack....note I'm using an additional map sensor for the zeitronix so it won't affect my engine management.

Re:Just got my Zeitronix WBO2 ZT2
 

that would be dope! let us know how it turns out. I'm also going to try plugging in my stock map sensor into the boost input on my Zeitronix... see what the readings look like, and if they are even close. For now I have the blue wire on the Zeitronix wb (user input 0-5v) hooked up to the map sensor... the only thing it works for really is seeing when you hit max boost and how consistent it is; good luck on measuring exactly what boost level it's at :-\

Speaking of that, does anyone have a table listing pressure levels corresponding to map sensor voltages? For the stock 1.75 bar map sensor? It would help alot.

Re:Just got my Zeitronix WBO2 ZT2
 

I've been doing that for awhile now with my zeitronix ;), except I hooked my stock map sensor using the user-definer input to see the voltage, the just the proper calculation to get the boost :)

Re:Just got my Zeitronix WBO2 ZT2
 

http://www.honda-tech.com/zerothread?id=988755

If we can learn to read in volts instead of psi we'll all be gravy. 8)

Re:Just got my Zeitronix WBO2 ZT2
 

awesome... ;D
So just use the user defined input...you didn't mess with the voltage going ot the map sensor?