Im a mongoloid...DSM injectors
#1
Guest
Posts: n/a
Im a mongoloid...DSM injectors
Got everything going on the GRM car.
crank , it fires, but doesn't run..
D16Z6
oBDo to 1
DSM 450's
stock resistor box
89 EF si
Do I need to do any resistor box wiring to make this work??
I have found a few conflicting articles
crank , it fires, but doesn't run..
D16Z6
oBDo to 1
DSM 450's
stock resistor box
89 EF si
Do I need to do any resistor box wiring to make this work??
I have found a few conflicting articles
#6
Re: Im a mongoloid...DSM injectors
there is no debate on it. you have to run a resistor box. if not, those injectors will fry your ecu. it might take a while though, i have never done it.
if you are trying to run on the stock ecu it should fire and die. you are getting almost twice as much fuel as you should. try running it with a bunch of throttle. that should keep it alive to see if everything is working, but i wouldnt do it long, you dont want to wash the oil from the cylinders
if you are trying to run on the stock ecu it should fire and die. you are getting almost twice as much fuel as you should. try running it with a bunch of throttle. that should keep it alive to see if everything is working, but i wouldnt do it long, you dont want to wash the oil from the cylinders
#8
Re: Im a mongoloid...DSM injectors
then it wasnt wired right. a resistor box wont stop them from working if wired right. if a resistor box is used when its not needed then you will ruin the injectors. i also dont know how long that takes cause i have never done it