HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Im a mongoloid...DSM injectors (https://www.homemadeturbo.com/engine-management-10/im-mongoloid-dsm-injectors-95335/)

86 fiero 09-14-2008 01:09 AM

Im a mongoloid...DSM injectors
 
Got everything going on the GRM car.

crank , it fires, but doesn't run..

D16Z6

oBDo to 1
DSM 450's
stock resistor box
89 EF si

Do I need to do any resistor box wiring to make this work??

I have found a few conflicting articles

NIGn0g 09-14-2008 01:15 AM

Re: Im a mongoloid...DSM injectors
 
On my teg I run them without resistor box.
Wasnt starting with the resistor box so I removed it...

SpankedYA! 09-14-2008 10:41 AM

Re: Im a mongoloid...DSM injectors
 
LOL Really? You need the resistor box. It should run. Did you swap injector clips? Are they spraying? Did you check spark? Do you have a basemap for 450's?

86 fiero 09-14-2008 11:40 AM

Re: Im a mongoloid...DSM injectors
 
This is what I have been finding , you need it , don't need it...ect.. Re-wire it...


I have a basemap on the way , right noiw I just have the stock socketed Po6

SpankedYA! 09-14-2008 12:46 PM

Re: Im a mongoloid...DSM injectors
 
Wait what? You have a socketed P06 with a blank chip in it? Is your J1 jumper cut? It would pop with the 450 and maybe even run a bit but not run well and will foul the plugs.

Scott-EP 09-14-2008 01:25 PM

Re: Im a mongoloid...DSM injectors
 
there is no debate on it. you have to run a resistor box. if not, those injectors will fry your ecu. it might take a while though, i have never done it.

if you are trying to run on the stock ecu it should fire and die. you are getting almost twice as much fuel as you should. try running it with a bunch of throttle. that should keep it alive to see if everything is working, but i wouldnt do it long, you dont want to wash the oil from the cylinders

NIGn0g 09-14-2008 01:29 PM

Re: Im a mongoloid...DSM injectors
 
Damn, so why they were not working at first??? lol Maybe it was just a coincidence that they didnt run at first and work after the removal...

Scott-EP 09-14-2008 01:49 PM

Re: Im a mongoloid...DSM injectors
 
then it wasnt wired right. a resistor box wont stop them from working if wired right. if a resistor box is used when its not needed then you will ruin the injectors. i also dont know how long that takes cause i have never done it

NIGn0g 09-14-2008 01:57 PM

Re: Im a mongoloid...DSM injectors
 
I didnt touch the resistor before so it must be a bad luck... Anyway I drove it 4 times and didnt burn anything... I'll check this out before the next run.

Scott-EP 09-14-2008 02:11 PM

Re: Im a mongoloid...DSM injectors
 
did your car come stock with a resitor box? i dont really mess with tegs


All times are GMT -5. The time now is 04:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands