I need a good working p28 to chip for FREE!
07-30-2004, 01:02 AM
#1
1.5 BAR
Thread Starter
Join Date: Feb 2004
Posts: 1,039
I need a good working p28 to chip for FREE!
ok; i've been having hell with my d16z6 engine swap in my 90 civic si and i've narrowed it down to the computer being a flake.
If someone out there has a p28 or similar obd1 ecu they need chipped and they KNOW it works then i'll chip it for free if you pay shipping to me and i'll send it back as soon as i can (2 days later tops).
PLEASE someone i need a good working ecu to test this thing with ASAP!!!
I have ebay referances under the uid TSAudio; i have heatware under the uid ComputerJLT and i am paypal verified computerjlt at yahoo.com. I also have traded with a few people on this board as well honda-tech and others.
If someone out there has a p28 or similar obd1 ecu they need chipped and they KNOW it works then i'll chip it for free if you pay shipping to me and i'll send it back as soon as i can (2 days later tops).
PLEASE someone i need a good working ecu to test this thing with ASAP!!!
I have ebay referances under the uid TSAudio; i have heatware under the uid ComputerJLT and i am paypal verified computerjlt at yahoo.com. I also have traded with a few people on this board as well honda-tech and others.
07-30-2004, 11:58 PM
#3
1.5 BAR
Thread Starter
Join Date: Feb 2004
Posts: 1,039
Re:I need a good working p28 to chip for FREE!
no; auto or manual p28;
but i think i found a guy with one; i'll let you know; or if you still need it chipped i may have enough stuff to do 2 and could do yours for a nominal fee
but i think i found a guy with one; i'll let you know; or if you still need it chipped i may have enough stuff to do 2 and could do yours for a nominal fee
08-02-2004, 11:29 PM
#6
1.5 BAR
Join Date: Aug 2003
Posts: 1,068
Re:I need a good working p28 to chip for FREE!
does it matter if it is for an auto? if not, i have one. also i have a b18b1 swap in my 94 ex sedan. i am converting from an auto to 5-speed. with gsr tranny
ComputerJLT I am doing a swap similiar to the one posted above. it is a Ls/Vtec swap into my 93 Ex in which the car was an AUTO and am now putting in a 5spd with the new Ls/Vtec setup so I was wondering if I can just chip my AUTO P28 and use it to run the new engine and 5spd or if I should just go out and get a 5spd ECU and just chip that one? thanks alot JLT
ComputerJLT I am doing a swap similiar to the one posted above. it is a Ls/Vtec swap into my 93 Ex in which the car was an AUTO and am now putting in a 5spd with the new Ls/Vtec setup so I was wondering if I can just chip my AUTO P28 and use it to run the new engine and 5spd or if I should just go out and get a 5spd ECU and just chip that one? thanks alot JLT
08-03-2004, 12:49 AM
#7
1.5 BAR
Thread Starter
Join Date: Feb 2004
Posts: 1,039
Re:I need a good working p28 to chip for FREE!
Originally Posted by shanerv
does it matter if it is for an auto? if not, i have one. also i have a b18b1 swap in my 94 ex sedan. i am converting from an auto to 5-speed. with gsr tranny
ComputerJLT I am doing a swap similiar to the one posted above. it is a Ls/Vtec swap into my 93 Ex in which the car was an AUTO and am now putting in a 5spd with the new Ls/Vtec setup so I was wondering if I can just chip my AUTO P28 and use it to run the new engine and 5spd or if I should just go out and get a 5spd ECU and just chip that one? thanks alot JLT
ComputerJLT I am doing a swap similiar to the one posted above. it is a Ls/Vtec swap into my 93 Ex in which the car was an AUTO and am now putting in a 5spd with the new Ls/Vtec setup so I was wondering if I can just chip my AUTO P28 and use it to run the new engine and 5spd or if I should just go out and get a 5spd ECU and just chip that one? thanks alot JLT
and yes if you can ship tomorrow i'll chip your computer and mod for free
