Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

I need a good working p28 to chip for FREE!

Old 07-30-2004, 01:02 AM
  #1  
1.5 BAR
Thread Starter
 
Join Date: Feb 2004
Posts: 1,039
Default I need a good working p28 to chip for FREE!

ok; i've been having hell with my d16z6 engine swap in my 90 civic si and i've narrowed it down to the computer being a flake.
If someone out there has a p28 or similar obd1 ecu they need chipped and they KNOW it works then i'll chip it for free if you pay shipping to me and i'll send it back as soon as i can (2 days later tops).

PLEASE someone i need a good working ecu to test this thing with ASAP!!!


I have ebay referances under the uid TSAudio; i have heatware under the uid ComputerJLT and i am paypal verified computerjlt at yahoo.com. I also have traded with a few people on this board as well honda-tech and others.
ComputerJLT is offline  
Old 07-30-2004, 09:18 PM
  #2  
0.5 BAR
 
Join Date: May 2004
Posts: 154
Default Re:I need a good working p28 to chip for FREE!

does it matter if it is for an auto? if not, i have one. also i have a b18b1 swap in my 94 ex sedan. i am converting from an auto to 5-speed. with gsr tranny
Souutherncivic is offline  
Old 07-30-2004, 11:58 PM
  #3  
1.5 BAR
Thread Starter
 
Join Date: Feb 2004
Posts: 1,039
Default Re:I need a good working p28 to chip for FREE!

no; auto or manual p28;

but i think i found a guy with one; i'll let you know; or if you still need it chipped i may have enough stuff to do 2 and could do yours for a nominal fee
ComputerJLT is offline  
Old 07-31-2004, 07:54 AM
  #4  
0.5 BAR
 
Join Date: May 2004
Posts: 154
Default Re:I need a good working p28 to chip for FREE!

alright, let me know
Souutherncivic is offline  
Old 08-02-2004, 07:56 PM
  #5  
1.5 BAR
Thread Starter
 
Join Date: Feb 2004
Posts: 1,039
Default Re:I need a good working p28 to chip for FREE!

hey; still want me to chip your ecu?
ComputerJLT is offline  
Old 08-02-2004, 11:29 PM
  #6  
1.5 BAR
 
Join Date: Aug 2003
Posts: 1,068
Default Re:I need a good working p28 to chip for FREE!

does it matter if it is for an auto? if not, i have one. also i have a b18b1 swap in my 94 ex sedan. i am converting from an auto to 5-speed. with gsr tranny

ComputerJLT I am doing a swap similiar to the one posted above. it is a Ls/Vtec swap into my 93 Ex in which the car was an AUTO and am now putting in a 5spd with the new Ls/Vtec setup so I was wondering if I can just chip my AUTO P28 and use it to run the new engine and 5spd or if I should just go out and get a 5spd ECU and just chip that one? thanks alot JLT
shanerv is offline  
Old 08-03-2004, 12:49 AM
  #7  
1.5 BAR
Thread Starter
 
Join Date: Feb 2004
Posts: 1,039
Default Re:I need a good working p28 to chip for FREE!

Originally Posted by shanerv
does it matter if it is for an auto? if not, i have one. also i have a b18b1 swap in my 94 ex sedan. i am converting from an auto to 5-speed. with gsr tranny

ComputerJLT I am doing a swap similiar to the one posted above. it is a Ls/Vtec swap into my 93 Ex in which the car was an AUTO and am now putting in a 5spd with the new Ls/Vtec setup so I was wondering if I can just chip my AUTO P28 and use it to run the new engine and 5spd or if I should just go out and get a 5spd ECU and just chip that one? thanks alot JLT
remove 2 resistors and replace one with a jumper and you've just turned an auto p28 to a manual.
and yes if you can ship tomorrow i'll chip your computer and mod for free
ComputerJLT is offline  
Old 08-03-2004, 04:34 PM
  #8  
0.5 BAR
 
Join Date: May 2004
Posts: 154
Default Re:I need a good working p28 to chip for FREE!

yes, can you chip it so i can use it with the b18? with a 5-speed tranny i am working nights from 7-7
Souutherncivic is offline  
Old 08-03-2004, 06:39 PM
  #9  
1.5 BAR
Thread Starter
 
Join Date: Feb 2004
Posts: 1,039
Default Re:I need a good working p28 to chip for FREE!

i can do whatever you want me to
i just need the computer like YESTERDAY!

ComputerJLT is offline  
Old 08-04-2004, 11:19 AM
  #10  
0.5 BAR
 
Join Date: May 2004
Posts: 154
Default Re:I need a good working p28 to chip for FREE!

give me an address to send it to or a phone # so we can hook this up
Souutherncivic is offline  

Thread Tools
Search this Thread
Quick Reply: I need a good working p28 to chip for FREE!


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.