SpankedYA!

Do you think your map would be good for say 7-8 psi?

scttydb411

i'm using a td04L...not too much bigger than what you have. i'm running 10-12psi so it'll probably be good for a useable basemap, but you'll still want to fine tune since all cars are different. it's going to run pretty lean cruising...i'm trying to experiment with fuel economy (15-16afr 2k-3k rpms at light trottle). it'll drop to mid 12afr dropping into boost. that bin also has .75 degree of retard...i just recently changed my recent one to .5 and now experimenting with bumping up timing off boost and the low end of boost.

just keep an eye on a wideband...don't assume that it's safe until you see what it does with a wideband...there might be enough differences in our cars for it to be too lean for your car.

good luck...let me know how it runs.

SpankedYA!

I don't have a WB. Should I richen it down low?

scttydb411

that's the problem with not having a wideband...you don't know where it is and then if you want to richen or lean it out you don't know how much to do it. find a dyno w/ a wideband or someone that has a techedge wb and check it if possible. then make your changes. that bin you have was change number 7 after i made my basemap.

SpankedYA!

Thanks for your input.