Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

i feel like a mad scientist-uber tuning

Old 05-17-2004, 11:05 PM
  #1  
1.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 1,008
Default i feel like a mad scientist-uber tuning

finally got my obd2-1 issues worked out and spent tonight street tuning. nice afr in 13's dropping to 12.5-12.0 from 3.5k to redline. still running the base timing w/ 0.75 degree of retard. next i'll work on the timing. i think i'll drop the retard to 0.5 (i was running 0.33 using the afc "hack") and maybe bump up the timing a little in vac.

cruising in vac below 3.5k i tuned for high 14's to low 16 afr. egt's look great too in and out of boost. hoping to get even better gas mileage than i was before.
scttydb411 is offline  
Old 05-18-2004, 08:23 PM
  #2  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:i feel like a mad scientist-uber tuning

Nice, whats your setup? Any Dyno plans soon?
tranceminister is offline  
Old 05-18-2004, 08:54 PM
  #3  
1.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 1,008
Default Re:i feel like a mad scientist-uber tuning

d16y7 w/ y8 intake manifold and throttlebody, td04L w/ std/hr manifold, starion fmic, dsm bov and 450cc inj. i was running the hack and had approx 180whp/170wtq. i'm not necessarily looking to get much more w/ uberdata except piece of mind and partial trottle boosting.
scttydb411 is offline  
Old 05-18-2004, 09:04 PM
  #4  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:i feel like a mad scientist-uber tuning

Sounds like a good setup. I know for a fact that running Uberdata over the AFC will give you reliability and part throttle boosting. But even if you wanted to tune for more power, at least now you've got that option and full control. It's a beautiful thing
tranceminister is offline  
Old 05-19-2004, 04:34 PM
  #5  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re:i feel like a mad scientist-uber tuning

PLEASE I BEG YOU!!! post your bin or PM it to me. You using 1.65 or 1.66? I am running almost the exact same set up.
SpankedYA! is offline  
Old 05-20-2004, 04:28 PM
  #6  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re:i feel like a mad scientist-uber tuning

Got it from Uber site thanks.
SpankedYA! is offline  
Old 05-25-2004, 01:39 PM
  #7  
0.0 BAR
 
Join Date: May 2004
Posts: 13
Default Re:i feel like a mad scientist-uber tuning

Originally Posted by scttydb411
d16y7 w/ y8 intake manifold and throttlebody, td04L w/ std/hr manifold, starion fmic, dsm bov and 450cc inj. i was running the hack and had approx 180whp/170wtq. i'm not necessarily looking to get much more w/ uberdata except piece of mind and partial trottle boosting.
how much boost?
zerogravity is offline  
Old 05-29-2004, 09:38 PM
  #8  
1.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 1,008
Default Re:i feel like a mad scientist-uber tuning

Originally Posted by zerogravity
Originally Posted by scttydb411
d16y7 w/ y8 intake manifold and throttlebody, td04L w/ std/hr manifold, starion fmic, dsm bov and 450cc inj. i was running the hack and had approx 180whp/170wtq. i'm not necessarily looking to get much more w/ uberdata except piece of mind and partial trottle boosting.
how much boost?
11-12psi.
scttydb411 is offline  
Old 05-29-2004, 09:46 PM
  #9  
1.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 1,008
Default Re:i feel like a mad scientist-uber tuning

Originally Posted by CSaddict
PLEASE I BEG YOU!!! post your bin or PM it to me. You using 1.65 or 1.66? I am running almost the exact same set up.
sorry i didn't get back to you...was on business trip and upon return internet was down for almost a week. looks like you found the bin i posted on uberdata. i've just recently changed the retard to .50 degree/lb. i still need some more fine tuning and time to strap it on the dyno to see what i'm getting.

have you used the bin yet? how's it work for you?
scttydb411 is offline  
Old 05-30-2004, 09:06 PM
  #10  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re:i feel like a mad scientist-uber tuning

Im in the process of putting it all together. I removed my A/C, converted to a P06 and did a 3 wire to 2 wire IAC conversion this weekend. I also bored my seals for my 450's. I'm having trouble getting the bolts out of my turbo to clock it correctly. Hopefully this week I will get the ECU chip ready with my kit from Moates. I have already burned your .bin to a chip with my Moates burner, so its ready to go! Did you use 1.66? I hope so! THanks for your input! What size is the turbo you are using? Mine is 48.42 Saab unit. My Tyrus FMIC should be here this week!
SpankedYA! is offline  

Thread Tools
Search this Thread
Quick Reply: i feel like a mad scientist-uber tuning


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.