Home Made Water / Meth Injection ??? Anyone ??
#11
Re: Home Made Water / Meth Injection ??? Anyone ??
Originally Posted by Joseph Davis
Yes, and as usual people's main complaints aren't the problem at hand. If you aren't getting an even mix of water to each cylinder, you aren't getting an even distribution of air to each cylinder. I mean to say you *never* get an even mix of air to each cyl. Why are they bitching? I don't know, either...
The problem is 99.7% of water injection kits either supply a fixed rate of water, or ramp things up based on boost pressure with no regard for how much water is actually needed. You need to keep water:fuel ratio precise (since we tune fuel to match the amount of air entering the engine, this keeps water/power ratio predictable) and then tweak individual injector fuel trims to get everything to match up.
Or that's the idea, anyway.
The problem is 99.7% of water injection kits either supply a fixed rate of water, or ramp things up based on boost pressure with no regard for how much water is actually needed. You need to keep water:fuel ratio precise (since we tune fuel to match the amount of air entering the engine, this keeps water/power ratio predictable) and then tweak individual injector fuel trims to get everything to match up.
Or that's the idea, anyway.
#12
Re: Home Made Water / Meth Injection ??? Anyone ??
Originally Posted by rawr
You could just make a blow through water carb
#13
Re: Home Made Water / Meth Injection ??? Anyone ??
make a throttle body space with a venturi, play around with jetting to get it right, and have a small pump to olny supply water when you are under boost, would help to have a vacum manifold so you can pressurise the holding tank and the "fuel bowl" basical a simble carb but alot bigger than normal so it dosent restric flow to much
#15
Re: Home Made Water / Meth Injection ??? Anyone ??
bigger picture? you would need a second fuel pump and fuel press reg to fed the injector, boost pressure i dont think would be goo enough, also i dont how you would get the injector to open anc close, i dont how they work.... :1
#17
Re: Home Made Water / Meth Injection ??? Anyone ??
Injector internals are stainless, they will not rust.
The problem is spray pattern... or complete lack thereof. Fuel injectors are designed to atomize not-water. Water shoots out in a squirtgun like straight line. You need to lower surface tension to get water to atomize through a fuel injector....
The problem is spray pattern... or complete lack thereof. Fuel injectors are designed to atomize not-water. Water shoots out in a squirtgun like straight line. You need to lower surface tension to get water to atomize through a fuel injector....
Thread
Thread Starter
Forum
Replies
Last Post
BoostGear
Forced Induction
4
05-01-2009 10:46 AM
QwikCRX
Forced Induction
10
10-08-2008 11:39 PM
hamburgler
Forced Induction
3
08-06-2007 01:57 PM
Xgenturbo
General Discussion
6
07-22-2006 12:44 PM
willahlborn
Forced Induction
1
10-24-2003 04:02 PM