HELP!! VAFC setting for OBDO b16a Turbo!!!
#1
HELP!! VAFC setting for OBDO b16a Turbo!!!
HI can someone help me on a Safe VAFC setting for my b16a turbo..this is my first time turbocharing. i have no idea on how to do the setting..
here is what i have...
255 fuel pump
450 cc injector
Apex-i V-AFC
t3/t4 turbo
i want to be pushing about 10 psi....
an entire setting would be helpful thanks....
here is what i have...
255 fuel pump
450 cc injector
Apex-i V-AFC
t3/t4 turbo
i want to be pushing about 10 psi....
an entire setting would be helpful thanks....
#2
Re: HELP!! VAFC setting for OBDO b16a Turbo!!!
ok! im running almost a similar setup.
B16a PR3 OBD0
450cc dsms
FMIC
FPR set to 50psi at idle (with vacuum connected)
a T28 turbo
VAFC Hack
My VAFC settings are
Low is 20% High is 75%
TE Points : Low
1000 -38
2000 -38
2500 -36
3000 -34
3500 -33
4000 -32
4500 -31
5000 -30
TE Point : High
4500 -28
5000 -27
5500 -27
6000 -27
6500 -27
7000 -27
7500 -27
8300 -26
this is it . Remains same for Low and High CAMs both. works realyl well but do give it another check on ur setup.
B16a PR3 OBD0
450cc dsms
FMIC
FPR set to 50psi at idle (with vacuum connected)
a T28 turbo
VAFC Hack
My VAFC settings are
Low is 20% High is 75%
TE Points : Low
1000 -38
2000 -38
2500 -36
3000 -34
3500 -33
4000 -32
4500 -31
5000 -30
TE Point : High
4500 -28
5000 -27
5500 -27
6000 -27
6500 -27
7000 -27
7500 -27
8300 -26
this is it . Remains same for Low and High CAMs both. works realyl well but do give it another check on ur setup.
#3
Re: HELP!! VAFC setting for OBDO b16a Turbo!!!
this is a good base i found but every car is diffrent .
http://www.boostmachines.com/Technical/
http://www.boostmachines.com/Technical/
Thread
Thread Starter
Forum
Replies
Last Post