HELP! is uberdata really as easy as it seems????
#12
Re:HELP! is uberdata really as easy as it seems????
ok, i get it ... now when im scaling down the actual map in rows and colums, say i want to lean it out a bit around 6500rmps.... now at this point i will obviously be at full boost (8psi)
so would i pull fuel only from the colum for 8psi? or would i pull if all the way across the boost portion of 6500rmps
these are just a few things that i dont really understand being that im just starting to understand tuning a bit, well i understand tunning, just never gone and done it for myself..
also whats up with this closed loop, open loop thing i keep hearing about datalogging
so would i pull fuel only from the colum for 8psi? or would i pull if all the way across the boost portion of 6500rmps
these are just a few things that i dont really understand being that im just starting to understand tuning a bit, well i understand tunning, just never gone and done it for myself..
also whats up with this closed loop, open loop thing i keep hearing about datalogging
#14
Re:HELP! is uberdata really as easy as it seems????
closed loop is when the ecu is making a/f corrections (at part throttle) based on the o2 sensor readings, when you go past part throttle, the ecu is forced in to open loop where it starts going off of the programmed rom. have you ever watched an a/f gauge? see how it bounces back and forth when you're cruising? b/c the ecu is constantly making corrections. notice when you floor it, it stays steady? that's b/c the ecu is no longer making the corrections to it, it's running off a set map. it's just easier to tune in open loop b/c the ecu isn't making corrections making your numbers jump all around.
#15
Re:HELP! is uberdata really as easy as it seems????
Originally Posted by projekteg
no, that would be advacning timing und-er boost. for about 10 -12 psi, you want to be around 18-20° in the high rpms.
im gonna run 8 pounds, and i hear that pulling a full degree was a littel comservative... i was gonna try .75 but it looks like at 6500 rmps that the timing would be 28.64 ... u think that is to agressive
also, whats up with these charts, the higher i get in the rmps it seems the biger the gap in the rmp reance ... the colum goes:
5189
5626
6500
7940
is it me or are those really big gaps for tunning
#17
Re:HELP! is uberdata really as easy as it seems????
ok, your right... am i then correct in saying that when the map sensor senses boost it advances the timing
what static timing is everyone runing their dizzy's at
and at what point would u end up with to little timing i hear if u pull it too much it will really spick up you egt's...
and let me just take the time now to say thanks for all this help.... i really do apreciate it ...
what static timing is everyone runing their dizzy's at
and at what point would u end up with to little timing i hear if u pull it too much it will really spick up you egt's...
and let me just take the time now to say thanks for all this help.... i really do apreciate it ...
#18
Re:HELP! is uberdata really as easy as it seems????
oh, and those intervals dont seem too big for you does the program autmaticaly set the fuel and whatnot between the two rmp levels depending on what they are set at??
#19
Re:HELP! is uberdata really as easy as it seems????
Originally Posted by 92hatchattack
ok, your right... am i then correct in saying that when the map sensor senses boost it advances the timing
what static timing is everyone runing their dizzy's at
and at what point would u end up with to little timing i hear if u pull it too much it will really spick up you egt's...
and let me just take the time now to say thanks for all this help.... i really do apreciate it ...
what static timing is everyone runing their dizzy's at
and at what point would u end up with to little timing i hear if u pull it too much it will really spick up you egt's...
and let me just take the time now to say thanks for all this help.... i really do apreciate it ...
#20
Re:HELP! is uberdata really as easy as it seems????
very cool, i dont think ill set my own maps myself just yet, ill setup everything with the set up in euberdata, and maybe after my car is up and running good, during the tunning process i will start to play with thouse things a little bit more when i am really feeling more comforatable in the program ..
yes, ive been to the uberdata forum, i just havent registered, so i guess i gotta get on that lol
yes, ive been to the uberdata forum, i just havent registered, so i guess i gotta get on that lol