HomemadeTurbo - DIY Turbo Forum - Help! TE chipped ecu

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Help! TE chipped ecu (https://www.homemadeturbo.com/engine-management-10/help-te-chipped-ecu-25845/)

Re:Help! TE chipped ecu

I actually used the same BIN I was running at the time in my setup.

I believe it was right after NG48 had been released but I cant quite remember.

Hit me up on AIM and I will help you out, send you my latest BIN if I have to...

So everyone knows, I am using the PM6 based code in my PR4-A01 ECU now...boost is great, VAC maps are poop!

Re:Help! TE chipped ecu

Sounds good. I'm not working tomorrow so let me know what time your going to be online.

Thanks

Re:Help! TE chipped ecu

can turbo EDIT be used on obd1 cars?

Re:Help! TE chipped ecu

Quote:

Originally Posted by turboDA6

can turbo EDIT be used on obd1 cars?

nope.

Re:Help! TE chipped ecu

Quote:

Originally Posted by TMonarky

Well, I just finished my install (Pics. will be up soon) I decided to turn on my car with my stock ecu to check if everything went well and my car ran fine. Then , I put in my TE chipped ecu and turn my car on and my car runs and sounds like crap. It's way to rich. When I step on the gas the rpm's dont want to go up, it boggs and white smoke comes out.

I just went back and re-read your post, and then went back to read your old emails to see if I was halucinating.

Let me get the order of events straight:
1) You installed the turbo setup
2) You plugged in stock ECU, car ran fine
3) You plugged in chipped TurboEdit ECU, car ran shitty

Now between #2 & #3...did you change out the injectors too?

Stock injectors are 240cc and you told me you were running 450cc injectors with a 255 walbro pump. Stock ECU should not have run the 450s *fine* and the chipped ECU wouldn't run the stock 240cc injectors very well at all.

Just trying to be sure it's not something really simple...

Re:Help! TE chipped ecu

Yes I installed the 450's between #2 & #3.
Wait> I havent installed the 255 fuel pump, I still have the stock one in there could that be the problem?

Re:Help! TE chipped ecu

Quote:

Originally Posted by TMonarky

Yes I installed the 450's between #2 & #3.
Wait> I havent installed the 255 fuel pump, I still have the stock one in there could that be the problem?

not very likely that the pump would cause these problems for you unless yours is bad anyways.

Re:Help! TE chipped ecu

Quote:

Originally Posted by TMonarky

Yes I installed the 450's between #2 & #3.
Wait> I havent installed the 255 fuel pump, I still have the stock one in there could that be the problem?

Nope it's not the pump.

I still don't understand it...my car ran fine on that same map and ECU...B18a w/ 450s ???

Re:Help! TE chipped ecu

What could it be then ???
I basically have the same setup as you, there for my ecu should work on my car too.

Help!