Help! TE chipped ecu
Ok. So I had my ecu (PR4) chipped with a base map. Well, I just finished my install (Pics. will be up soon) I decided to turn on my car with my stock ecu to check if everything went well and my car ran fine. Then , I put in my TE chipped ecu and turn my car on and my car runs and sounds like crap. It's way to rich. When I step on the gas the rpm's dont want to go up, it boggs and white smoke comes out. What I'm really trying to ask is if anyone would be kind enough to burn me a new chip with a working LS PR4 map. I will pay for shipping and what ever else. I really need you guys help. This is the last thing I need in order to boost.
Plase help and thanks in advance. Sorry for the long post. |
Re:Help! TE chipped ecu
What bin did you run on the chipped ECU? Try a stock PR4 bin and see if that works.
|
Re:Help! TE chipped ecu
check your timing.
what all do you have? |
Re:Help! TE chipped ecu
PR4s are scary. Turboedit's code wis designed for a PM6. It may run the car on a basic level, but there are enough design differences between the two ECUs that I would be very cautious using them. Xenocron documented some rather convincing AFR differences between the same program on PM6 vs PR4.
|
Re:Help! TE chipped ecu
spiceisler- I dont know what bin was used cause I had it chipped by Xenocron. Yes I did try a stock PR4 and the car runs good with it.
warrick- My timing is good it should be around 14-16 deg. My set-up is B18A, turbular header, T3 57 trim, 255 walbro, 450's, AFPR, 5" tyrus intercooler. blundar- Yeah Xenocron mentioned something to me about that but isn't johnny and a couple other guys runing a PR4 with TE? Help! |
Re:Help! TE chipped ecu
With the PM7 codebase, "TurboEDIT" runs fine on PR4s.. however, what is being said is that AFRs are a touch different. I.E., th ECU reads the values differently, and/or, reacts differently (speed wise), I don't know. It hasn't been determined.
..but, if you're tuning it yourself, a PR4 with a PR4, or PM7 codebase will run fine. |
Re:Help! TE chipped ecu
When you changed the ECU, did you change the injecters? What injecters is the chipped ECU set up to run?
|
Re:Help! TE chipped ecu
It should be set to run 450's blue tops.
|
Re:Help! TE chipped ecu
dont know the differences, but i had severe problems with ng48 smoking.. when i put my tables into ng30 it stopped
|
Re:Help! TE chipped ecu
Does anybody know what map(s) TurboHF or Random-Strike are using in there car?
|
Re:Help! TE chipped ecu
I actually used the same BIN I was running at the time in my setup.
I believe it was right after NG48 had been released but I cant quite remember. Hit me up on AIM and I will help you out, send you my latest BIN if I have to... So everyone knows, I am using the PM6 based code in my PR4-A01 ECU now...boost is great, VAC maps are poop! |
Re:Help! TE chipped ecu
Sounds good. I'm not working tomorrow so let me know what time your going to be online.
Thanks |
Re:Help! TE chipped ecu
can turbo EDIT be used on obd1 cars?
|
Re:Help! TE chipped ecu
Originally Posted by turboDA6
can turbo EDIT be used on obd1 cars?
nope. |
Re:Help! TE chipped ecu
Originally Posted by TMonarky
Well, I just finished my install (Pics. will be up soon) I decided to turn on my car with my stock ecu to check if everything went well and my car ran fine. Then , I put in my TE chipped ecu and turn my car on and my car runs and sounds like crap. It's way to rich. When I step on the gas the rpm's dont want to go up, it boggs and white smoke comes out.
Let me get the order of events straight: 1) You installed the turbo setup 2) You plugged in stock ECU, car ran fine 3) You plugged in chipped TurboEdit ECU, car ran shitty Now between #2 & #3...did you change out the injectors too? Stock injectors are 240cc and you told me you were running 450cc injectors with a 255 walbro pump. Stock ECU should not have run the 450s *fine* and the chipped ECU wouldn't run the stock 240cc injectors very well at all. Just trying to be sure it's not something really simple... |
Re:Help! TE chipped ecu
Yes I installed the 450's between #2 & #3.
Wait> I havent installed the 255 fuel pump, I still have the stock one in there could that be the problem? |
Re:Help! TE chipped ecu
Originally Posted by TMonarky
Yes I installed the 450's between #2 & #3.
Wait> I havent installed the 255 fuel pump, I still have the stock one in there could that be the problem? |
Re:Help! TE chipped ecu
Originally Posted by TMonarky
Yes I installed the 450's between #2 & #3.
Wait> I havent installed the 255 fuel pump, I still have the stock one in there could that be the problem? I still don't understand it...my car ran fine on that same map and ECU...B18a w/ 450s ??? |
Re:Help! TE chipped ecu
What could it be then ???
I basically have the same setup as you, there for my ecu should work on my car too. Help! |
All times are GMT -5. The time now is 11:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands