help with revline
#1
help with revline
for some reason I cant past 5200 rpms on my crx I usually can go 7000 rpms I dont know if is a ignition problem and I dont have any adea where to start looking
My current setup is mene me engine
zdyne gold ecu
msd 6 dual ignition
t3 turbo
also I was wandering if the problem can be cause by a vaccuum lick that I have
Any tips I will apreciate thanks
My current setup is mene me engine
zdyne gold ecu
msd 6 dual ignition
t3 turbo
also I was wandering if the problem can be cause by a vaccuum lick that I have
Any tips I will apreciate thanks
#2
Guest
Posts: n/a
Re: help with revline
Are you the mayor of Salsero? Is the town so poor that you all had to pull together to buy one car ?You can't spell at all So I guess they don't have quality public schools in Salsero Utah either.
FIrst thing stop licking your vacuum lines looking for a leak. To find a vacumm leak you can start the car and use some starting fluid sprayit around the intake manifold and vacuum lines. If the car revs up when you spray a certain spot youve found the leak.
You may be blowing out the spark. Check your sparkplug gap. It should be at .30
FIrst thing stop licking your vacuum lines looking for a leak. To find a vacumm leak you can start the car and use some starting fluid sprayit around the intake manifold and vacuum lines. If the car revs up when you spray a certain spot youve found the leak.
You may be blowing out the spark. Check your sparkplug gap. It should be at .30
#5
Re: help with revline
Do you know what MSD stands for My spark died. Disconnect your MSD and you will be fine. Same problem a couple weeks ago. To bad I was in the middle of a race weekend and spent about 800 dollars on every ------- part I could get me hands on.
Randy
Randy
Thread
Thread Starter
Forum
Replies
Last Post