HomemadeTurbo - DIY Turbo Forum

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Having a problem with my ecu chipped p06

Thread Tools
 
Search this Thread
 
Old 05-19-2008, 03:53 PM
  #1  
1.0 BAR
Thread Starter
 
Boosted4Life's Avatar
 
Join Date: Apr 2004
Posts: 482
Default Having a problem with my ecu chipped p06
i had my p06 chiped and i put it in my car and it does not work.It keeps blowing the ecu fuse.Any ideas would be appreciated
Boosted4Life is offline  
Reply
Old 05-19-2008, 05:19 PM
  #2  
HMTguy
Guest
 
Posts: n/a
Default Re: Having a problem with my ecu chipped p06
Probably a botched chipping job, something is shorting out.
 
Reply
Old 05-19-2008, 05:28 PM
  #3  
1.0 BAR
Thread Starter
 
Boosted4Life's Avatar
 
Join Date: Apr 2004
Posts: 482
Default Re: Having a problem with my ecu chipped p06
I had shanerv check it over since he chipped it and he said it looked ok.My question is can I just get a new chip kit from xeno and have shane do re chip it?
Boosted4Life is offline  
Reply
Old 05-19-2008, 05:41 PM
  #4  
0.0 BAR
 
b18.'s Avatar
 
Join Date: Nov 2006
Posts: 0
Default Re: Having a problem with my ecu chipped p06
What do you mean you "got a chip"?

You replaced the 28pin and then what. Check the jumper, one of them is ground for the processor/sink circuit as well, i.e. if it was touching something else with solder it would short.
b18. is offline  
Reply
Old 05-19-2008, 05:54 PM
  #5  
HMTguy
Guest
 
Posts: n/a
Default Re: Having a problem with my ecu chipped p06
Originally Posted by Boosted4Life
I had shanerv check it over since he chipped it and he said it looked ok.My question is can I just get a new chip kit from xeno and have shane do re chip it?
It must be good because it looks ok right? It obviously isn't. Either your ecu went bad from the time you removed it to the time you got it back or something was messed up in the chipping process. Which one do you think has a much higher chance of happening?
 
Reply
Old 05-19-2008, 07:57 PM
  #6  
3.0 BAR
 
Cray91's Avatar
 
Join Date: May 2004
Posts: 5,042
Default Re: Having a problem with my ecu chipped p06
Originally Posted by Boosted4Life
I had shanerv check it over since he chipped it and he said it looked ok.My question is can I just get a new chip kit from xeno and have shane do re chip it?
I can't see any reason why the program on the chip would change anything. Just have him do it over again.

There is a ton of stuff that could have gone wrong. I have had some that look great and simply resoldering can fix things.
Cray91 is offline  
Reply
Old 05-19-2008, 11:45 PM
  #7  
0.0 BAR
 
Guy-Fast's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re: Having a problem with my ecu chipped p06
were talking 60+joints soldered the human eye can read current now?
Guy-Fast is offline  
Reply
Old 05-20-2008, 12:27 AM
  #8  
HMTguy
Guest
 
Posts: n/a
Default Re: Having a problem with my ecu chipped p06
Originally Posted by chris
were talking 60+joints soldered the human eye can read current now?
Of course not

His eyes were reading voltage.
 
Reply
Old 05-20-2008, 12:54 AM
  #9  
0.0 BAR
 
Guy-Fast's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re: Having a problem with my ecu chipped p06
Originally Posted by jagojon3
Of course not

His eyes were reading voltage.
xmen style nerd version
Guy-Fast is offline  
Reply
Old 05-20-2008, 11:50 AM
  #10  
1.0 BAR
Thread Starter
 
Boosted4Life's Avatar
 
Join Date: Apr 2004
Posts: 482
Default Re: Having a problem with my ecu chipped p06
he resoldered everything and it is still having issues
Boosted4Life is offline  
Reply



Advanced Search
Quick Reply: Having a problem with my ecu chipped p06


Reply Closed Thread Share

All times are GMT -5. The time now is 05:43 PM.