Re: Got datacable today, not sure if it will work (Pic)
Try the drivers that came with your cable. Thats the only way mine works
|
Re: Got datacable today, not sure if it will work (Pic)
thanks, and yes I do have the shielding connected to the black(ground) wire.
Edit: BTW what does the J12 jumper do, it must be there for some reason. I will take it out and try tho. |
Re: Got datacable today, not sure if it will work (Pic)
I got that cable to work. You need to look at this pin out.
http://pinouts.ru/CellularPhones-Nok...p_pinout.shtml Typically known as the DKU-5 |
Re: Got datacable today, not sure if it will work (Pic)
Hey thanks! This may be a breakthrough
edit: What program are you using this with, just wondering |
Re: Got datacable today, not sure if it will work (Pic)
I used it with ecu control.
|
Re: Got datacable today, not sure if it will work (Pic)
GRRRRRR this pos still isnt working, I now have it wired correctly, thanks to CSaddict's pin-out. I also installed the driver that came on a cd with the cable, It said the new hardware was installed correctly, after i restarted, it wont even agnowledge (beep like it normally does) when i'm plugging the usb into it. I still have yet to see ANYTHING work. I took out jumper J12. If you know what any of the settings in EcuControl are supposed to be set at let me know, I need.....
1. port and speed 2.datalog settings 3. communication settings Also I go up the the ECU tab on the drop down menu and click OBD1-Uerdata-CromeROM. let me know what you think, thanks. |
Re: Got datacable today, not sure if it will work (Pic)
AFlso on that pinout, Pin5 is USB VBus, do i need this attached to the ecu? u currently do not, just the ground, Rx, and Tx.
|
Re: Got datacable today, not sure if it will work (Pic)
Ok so I understand that I have to reburn my chip with some datalogging? I have a willems enhanced using 29c256 chips on crome, where in crome do I find this and does anyone know how? I would really like to get this thing working soon, thank you.
|
Re: Got datacable today, not sure if it will work (Pic)
Ok, so I enabled the RTP or whatever the ---- it is in crome and burned a new chip, it still doesnt work, i'm on the right com port. I'm stumped, does crome need to be running or somthing, i dont know what the ---- is going on, ive tried everything i can think of
I did smell somthing the first time I tried it, is it possible i burned out the converter in the cable? It knows when i plug the cable in so I'm thinkin its still good. anything?!? |
Re: Got datacable today, not sure if it will work (Pic)
i couldnt get the shitty nokia cable to work either. Eventually you'll give up like me and buy one from xenocron for $30
|
All times are GMT -5. The time now is 07:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands