Re:Going to run Turbo edit...need a good Chip burned ..
 

I used to be a TurboEDIT -----, too, ya know. :'(

Re:Going to run Turbo edit...need a good Chip burned ..
 

You still are. Just like any good -----house, there's always room for more -----s. ;)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Going to run Turbo edit...need a good Chip burned ..
 

You solder in a socket after you desolder the stock chip...

There are a few types of sockets...all ECU's I do I include a ZIF (zero insertion force) which makes it very easy and safer to change chips, which most of us do have to do...

Re:Going to run Turbo edit...need a good Chip burned ..
 

so all you have to do is uninstall the current chip install a ZIF socket then from then on out the chips are just plug in and plug out? xenocron I will be shipping you an ecu as soon as I get close to finishing my project for a baseline map. i will have d16a6, t25, 450cc injectors, and 8psi. cool?

Re:Going to run Turbo edit...need a good Chip burned ..
 

jp...sounds good. All of my ECUs come with a ZIF socket and basemap burned on a chip to get you started.

Send me a PM or an email whenever you are ready.

Thanks

Re:Going to run Turbo edit...need a good Chip burned ..
 

This thread kind of echos a question I've had in the back of my mind for awhile...

So you get the socket installed, get chips and a burner and create your base-map (or find one created and tested for a similar car/setup). From there, you burn a chip and install it in your ECU.

What happens after that? I mean, is your car "tuned" based on the basemap, or do you need to gather more info, apply it to your existing basemap, burn a new chip, install etc...

Repeat as necessary?

Re:Going to run Turbo edit...need a good Chip burned ..
 

your car will not be tuned after you make a base map and get the ecu chipped and the Chip burned..thats whata wideband is for fine tuning... hope that helpd...