Going to run Turbo edit...need a good Chip burned ..
 

Like it say on the title, i need to get a chip burned for my PM6. Im running a DOHC ZC with 390 Dsm injectorS AND a t bird turbo at 5 psi right now. Who can hook a nukka up with a good decent burned chip? donald125 is hooking it up with installing the Zif but we both are unsure on how to play with TE. if anyone can send me a TE bin or know of a link where we can get a good Bin then that would also work. we have a burner so i guess all we need is a decent TE bin so we can get my 4 door going...

thanks in advance

julio

Re:Going to run Turbo edit...need a good Chip burned ..
 

Get a hold of xenocron he did a base program for me. He's great to deal with and had mine done in no time ;)

Re:Going to run Turbo edit...need a good Chip burned ..
 

WOW XENOCRON!! you seem to be da man ..i have been recommended by you so much ...well let me know if you can get that stuff for me...pm me when you get a chance

julio

and thanks highroller!!!

Re:Going to run Turbo edit...need a good Chip burned ..
 

PMd you back...I never knew I had all these people out there that keep recommending me...it's kinda neat :D

Re:Going to run Turbo edit...need a good Chip burned ..
 

You're the TurboEdit ----- around here. ;)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Going to run Turbo edit...need a good Chip burned ..
 

xenocron, i know you stay pretty busy but if you could assist me some with a basemap it would be greatly appreciated! may be fairly close to julios, its a d15b2 with pm6 ecu, mpfi etc..

Re:Going to run Turbo edit...need a good Chip burned ..
 

hey!!! get int line....:P

hey let me know when you get those maps done.

Re:Going to run Turbo edit...need a good Chip burned ..
 

I would say start small, use the NG28 code and use my BASEMAP write-up that I wrote to help people out.

NG48 acts much differently on my car...and I'm still getting used to it and learning it's intricacies so there isnt a real solid way to make a basemap write-up for this version yet.

Julio came to me and offered to pay me for the help...I graciously accepted and will help him make a few variations of basemaps and maybe some little remote tweaking. He gets 1st dibs...obviously :P

Re:Going to run Turbo edit...need a good Chip burned ..
 

money talks.. :P

hey bud, ill paypal you today! ;)

Re:Going to run Turbo edit...need a good Chip burned ..
 

i have a question about that... every time you burn a new chip do you have to solder it in everytime or is there a way to just plug it in? also where can i find a burner and spare chips... i would like to try this

Re:Going to run Turbo edit...need a good Chip burned ..
 

I used to be a TurboEDIT -----, too, ya know. :'(

Re:Going to run Turbo edit...need a good Chip burned ..
 

You still are. Just like any good -----house, there's always room for more -----s. ;)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Going to run Turbo edit...need a good Chip burned ..
 

You solder in a socket after you desolder the stock chip...

There are a few types of sockets...all ECU's I do I include a ZIF (zero insertion force) which makes it very easy and safer to change chips, which most of us do have to do...

Re:Going to run Turbo edit...need a good Chip burned ..
 

so all you have to do is uninstall the current chip install a ZIF socket then from then on out the chips are just plug in and plug out? xenocron I will be shipping you an ecu as soon as I get close to finishing my project for a baseline map. i will have d16a6, t25, 450cc injectors, and 8psi. cool?

Re:Going to run Turbo edit...need a good Chip burned ..
 

jp...sounds good. All of my ECUs come with a ZIF socket and basemap burned on a chip to get you started.

Send me a PM or an email whenever you are ready.

Thanks

Re:Going to run Turbo edit...need a good Chip burned ..
 

This thread kind of echos a question I've had in the back of my mind for awhile...

So you get the socket installed, get chips and a burner and create your base-map (or find one created and tested for a similar car/setup). From there, you burn a chip and install it in your ECU.

What happens after that? I mean, is your car "tuned" based on the basemap, or do you need to gather more info, apply it to your existing basemap, burn a new chip, install etc...

Repeat as necessary?

Re:Going to run Turbo edit...need a good Chip burned ..
 

your car will not be tuned after you make a base map and get the ecu chipped and the Chip burned..thats whata wideband is for fine tuning... hope that helpd...