HomemadeTurbo - DIY Turbo Forum - Ghettodyne Support (OBD0)

Page 16 of 16

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Ghettodyne Support (OBD0) - Final Version: 2.3 (https://www.homemadeturbo.com/engine-management-10/ghettodyne-support-obd0-final-version-2-3-a-5168/)

Dawson

09-07-2003 08:16 PM

Re:Ghettodyne 2.2.1 w/ boost officially working

so, the new 2.3 only works for civic/crx 90-91 ecu's??

Boosted_SiR

11-09-2003 07:14 AM

Re:Ghettodyne 2.2.1 w/ boost officially working

Quote:

Originally Posted by scarecrowX

Quote:

Originally Posted by Jobi Joba

But in France we have 98 octane fuel...

different countries have different methods of rating the octane level of fuel. is your gas RON 98 octane, or R+M/2 98 octane. if it's RON 98 octane, it's roughly the same as our R+M/2 93 octane. just making sure, i'd hate for you to go really aggressive with the ignition and not have the anti-knock properties you think you do..

and awesome job with ghettodyne. i wish i was even half that computer savvy... ghettodyne doesn't really seem ghetto enough anymore =)

You are quite right. But 98RON is available everywhere which (I've heard) is not the case in the US

see this (readable short) article for exact details

http://www.btinternet.com/~madmole/R...RONMONPON.html

claytonsmith

12-08-2003 12:48 AM

Re:Ghettodyne 2.2.1 w/ boost officially working

ok i've read all this. a few months ago i read over the whole ghettodyne site.. frankly.. my head is spinning...

has the updated version for DOHC motors come out yet?? and my question is... if i can acquire a 90-91 ECU, what would someone charge me to chip it with the 3000RPM limiter ( its only at under 6mph right?)and a tune for 6-7psi of boost. i'm presently pieceing together a turbo ZC project( planning to run 6-7lbs of boost at the most and 450CC DSm injectors) and the G-DYNE setup seems far superior to a FMU which i had planned to use.
i hope someone can help me out here and chip an ecu for me.. my funds are limited and ghettodyne seems to be the best bang for the buck ;D

thanks to anyone who replies
-Clayton

Chris Harris

12-10-2003 08:31 PM

Re:Ghettodyne 2.2.1 w/ boost officially working

You are behind the times man. Read these two threads. Ghettodyne is no longer being developed but all of the efforts that went into it are...

https://www.homemadeturbo.com/forum/...threadid=10157

https://www.homemadeturbo.com/forum/...threadid=10776

claytonsmith

12-11-2003 01:00 AM

Re:Ghettodyne 2.2.1 w/ boost officially working

well ----.. thanks

-Clayton

tomcat

01-13-2004 11:45 AM

Re:Ghettodyne Support - Final Version: 2.3

i dont know if this trhead is old and done with but i need one of these chips does any one have one or could make me one

TurboEF9

01-14-2004 08:04 PM

Re:Ghettodyne Support (OBD0) - Final Version: 2.3

Ghettodyne is no longer being actively develpoed. :'( However, we know there are many loyal users still out there using this great program. If you have any questions, comments or concerns specifically pertaining to Ghettodyne operation, please post a new topic to the Engine Management forum. ;D

[EDIT]
..almost forgot, still downloadable from http://www.GhettoDyne.com!
[/EDIT

All times are GMT -5. The time now is 10:53 PM.

Page 16 of 16

« First

Show 40 post(s) from this thread on one page