Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

getting a LC-1 wideband and a few questions

Old 06-12-2005, 03:49 AM
  #1  
0.0 BAR
Thread Starter
 
Join Date: Mar 2003
Posts: 0
Default getting a LC-1 wideband and a few questions

okay here is the situation, i have a turboed car with chipped ecu with uberdata. i want to start trying to tune. i seen that the LC-1 was pretty cheap and didn't have a display but i have a laptop that i can hook up to my ecu using the serial port. i am also getting the ostrich and i think it said it uses the USB port. so what would i have to do to get the wideband to datalog onto the laptop?
J-MAN is offline  
Old 06-12-2005, 03:58 PM
  #2  
0.0 BAR
Thread Starter
 
Join Date: Mar 2003
Posts: 0
Default Re: getting a LC-1 wideband and a few questions

okay i read that you hook the wideband to the ecu O2 sensor wire and then switched power and ground. and when datalogging and runnign ostrich at the same time i have to have two UD open, one for tuning and one for datalogging.

anything else that i'm missing? or can anybody confirm this?
J-MAN is offline  
Old 06-16-2005, 06:25 PM
  #3  
3.0 BAR
 
Join Date: Jan 2004
Posts: 5,709
Default Re: getting a LC-1 wideband and a few questions

couldnt you use ecucontrol or cuddle to datalog why not just datalog with UD and then go back and adjust what you need to
BoosTedZSix is offline  
Old 06-17-2005, 12:15 AM
  #4  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: getting a LC-1 wideband and a few questions

Originally Posted by jeffsciv23
okay i read that you hook the wideband to the ecu O2 sensor wire and then switched power and ground. and when datalogging and runnign ostrich at the same time i have to have two UD open, one for tuning and one for datalogging.

anything else that i'm missing? or can anybody confirm this?
Two dont need to be open...you can do both at the same time in one.
Chris Harris is offline  
Old 06-17-2005, 01:18 PM
  #5  
0.0 BAR
Thread Starter
 
Join Date: Mar 2003
Posts: 0
Default Re: getting a LC-1 wideband and a few questions

on the uber forum somebody said that you needed two open. but maybe i'm just confused or it was just a certain version. i don't know, i'll go on there and see what the newest/most stable version that supports ostrich.
J-MAN is offline  
Old 06-17-2005, 02:44 PM
  #6  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: getting a LC-1 wideband and a few questions

Cough Buy Crome Cough

Sorry...I couldnt resist...I had a EXTREMELY difficult night this week with Uber, made my despise for it even greater. Just had to get that out of my system...
Chris Harris is offline  
Old 06-17-2005, 08:50 PM
  #7  
0.0 BAR
Thread Starter
 
Join Date: Mar 2003
Posts: 0
Default Re: getting a LC-1 wideband and a few questions

Originally Posted by xenocron
Cough Buy Crome Cough

Sorry...I couldnt resist...I had a EXTREMELY difficult night this week with Uber, made my despise for it even greater. Just had to get that out of my system...
know what you mean, been trying to figure out what version works best with the ostrich and actually be able to make changes. i guess the headache only gets bigger the deeper you get
J-MAN is offline  
Old 06-17-2005, 10:35 PM
  #8  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: getting a LC-1 wideband and a few questions

Its really sad...I mean, all I hear now is that nasty rumor that even Blake is using Crome instead of his own program. Not that I can verify its truth but when you hear it from 10 or so people...

Uberdata survived strictly on the passion of a few moderators over there at their forums. It's creator is letting it die IMHO.
Chris Harris is offline  
Old 06-17-2005, 11:15 PM
  #9  
0.0 BAR
Thread Starter
 
Join Date: Mar 2003
Posts: 0
Default Re: getting a LC-1 wideband and a few questions

hope it isn't so. that would be pretty sad. maybe he is using crome to get ideas for uberdata .

what is a good website to download crome and learn about it? isn't it basically the same thing as uber? does it support ostrich?


EDIT: nevermind i just found the motherload of information on crome. looks pretty easy to use maybe i will try it out. do you know of any draw backs or downsides to using crome?
J-MAN is offline  
Old 06-18-2005, 12:07 AM
  #10  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: getting a LC-1 wideband and a few questions

Originally Posted by jeffsciv23
hope it isn't so. that would be pretty sad. maybe he is using crome to get ideas for uberdata .

what is a good website to download crome and learn about it? isn't it basically the same thing as uber? does it support ostrich?


EDIT: nevermind i just found the motherload of information on crome. looks pretty easy to use maybe i will try it out. do you know of any draw backs or downsides to using crome?
Only issue right now is that fact you cant disable VTP or VTS without funky consequences...but it is being addresses.

With your LC-1 wired directly to the ECU, tuning is a breeze with Crome.
Chris Harris is offline  

Thread Tools
Search this Thread
Quick Reply: getting a LC-1 wideband and a few questions


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.