FMU QUESTION!!.........help me
The next week i will put the turbo kit in my car ;D.....it's a 05 civic with the d17a1 engine (sohc non-vtec).I think that i will run @ 6 psi? :y it is ok?......I have:
manifold t3-t4 turbocharger + oil line wastegate Saab Side Mount Intercooler Charge pipes came out from a dsm and from a volvo turbo :S greddy type rs blow of valve here is my questions: 1)what other thing i need? 2) i have a BLOX FMU 12:1,......for engine management, this will work?....or what other thing i need?!! ??? |
Re: FMU QUESTION!!.........help me
good luck with that. nice turbo
|
Re: FMU QUESTION!!.........help me
i think 6psi is good enough to stock engine using FMU
but my advice to decide in the future to change the fmu with any electronic method (chip, safc+cold spark blug+ rotat your destributor, stand alon managment) and the big injectors but of cours the chiping is the best at all. |
Re: FMU QUESTION!!.........help me
Originally Posted by hany
i think 6psi is good enough to stock engine using FMU
but my advice to decide in the future to change the fmu with any electronic method (chip, safc+cold spark blug+ rotat your destributor, stand alon managment) and the big injectors but of cours the chiping is the best at all. It will run and most likely not blow up, but it wont run nearly as well as it would with proper management. I'd advise you to upgrade your fuel pump if you're running an FMU. As far as the other stuff you'll need, check the stickys in the FI forum. |
Re: FMU QUESTION!!.........help me
i really dont understand why ppl want runing with those shits if they can to run with ecu chipped very well to good prices.. :3
|
Re: FMU QUESTION!!.........help me
Used FMU = $50
Upgrade to HP fuel pump $100 Retard ignition timing for shitty off-boost performance = free Rope = free ---- method to tuning = $150 Chipping kit $20 450's $50 Willem Burner $40 Borrow a wideband = free Awesome, adjustable, reliable tuning $110 |
Re: FMU QUESTION!!.........help me
at least he took the picture of the china turbo and replaced it with garrett
|
Re: FMU QUESTION!!.........help me
a t3 to t4? does the compressor wheel change like a transformer into a .92 t4 wheel, back into a .48 t3 wheel for lowend?
|
Re: FMU QUESTION!!.........help me
You guys did all read that this is an '05 Civic right? There are arent chipping upgrades that I know of yet...
Tunability is limited to Emanage, AFC (maybe) and Hond$t$ might have a reflash out...who knows. |
Re: FMU QUESTION!!.........help me
Hi German, jejeje, im going to install his turbo kit ;D
|
All times are GMT -5. The time now is 09:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands