which FMU on D16a6 T3 0.36/0.48
#13
Re: which FMU on D16a6 T3 0.36/0.48
Originally Posted by taiajam
ive googled but cant find info about missing link. its basicly the same as chekvalves? why buying a missing link if you kan use a few chekvales $5 or so..
checkout http://www.synapseengineering.com
#16
Re: which FMU on D16a6 T3 0.36/0.48
why buying a missing link if you kan use a few chekvales $5 or so..
Doesnt look nice (i dont care, als long as its works safe.) then ill buy 5 of them.
but bassicly its the same thing as a missing link? whats the advantage of a missinglink?
here some pix of my turbo
i hope some1 recognize this turbo, so i can know the psi.
its T3 in the compressorhouse is .42
You've got a point there, but it doesn't look nice, and you'll need about five of them, before you won't get any CEL's. (Check Engine Light).
checkout http://www.synapseengineering.com
checkout http://www.synapseengineering.com
but bassicly its the same thing as a missing link? whats the advantage of a missinglink?
here some pix of my turbo
i hope some1 recognize this turbo, so i can know the psi.
its T3 in the compressorhouse is .42
#17
Re: which FMU on D16a6 T3 0.36/0.48
it's probably a T3 Garret Turbo Research turbo that's a .42/.48 (.42 compressor side, and .48 turbine side) If you take the turbo off of the manifold and look inside where the exhaust first goes into the turbo, there should be a .xx number stamped into the housing like on the compressor side.
#19
Re: which FMU on D16a6 T3 0.36/0.48
Originally Posted by shanerv
it's probably a T3 Garret Turbo Research turbo that's a .42/.48 (.42 compressor side, and .48 turbine side) If you take the turbo off of the manifold and look inside where the exhaust first goes into the turbo, there should be a .xx number stamped into the housing like on the compressor side.
i could see a blurry something like a 6? (i used lots of imagination, turning it into a 6)
but there was nothing more..