Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

A/F gauge not working

Old 06-02-2006, 11:16 AM
  #1  
1.0 BAR
Thread Starter
 
Join Date: May 2006
Posts: 295
Default A/F gauge not working

Just installed my air/fuel gauge, and it wont display reading. I taped into the green/black wire on harness which goes to the white wire on 02 sensor...

Im not sure if tapping the harness instead of the sensor wire would cause it to not work, or am i on the wrong circuit all together
StinkyFeet is offline  
Old 06-02-2006, 11:46 AM
  #2  
3.0 BAR
 
Join Date: Sep 2003
Posts: 3,751
Default Re: A/F gauge not working

MMMM, could be because it's useless Narrowband, In actual fact you lucky it doesn't work, because all the blinking light mean nothing so it is VERY annoying!!!
bumblezc is offline  
Old 06-02-2006, 12:10 PM
  #3  
3.0 BAR
 
Join Date: Mar 2004
Posts: 2,039
Default Re: A/F gauge not working

Well it is useless but My friend and I had the same problem with his car I believe he just tapped in the wires coming off of the O2 sensor maybe you should try that i believe
Loserkidwac is offline  
Old 06-02-2006, 01:09 PM
  #4  
1.5 BAR
 
Join Date: Aug 2004
Posts: 949
Default Re: A/F gauge not working

D14 on a P28. Check all your wires.
95RedEX is offline  
Old 06-02-2006, 01:32 PM
  #5  
1.0 BAR
Thread Starter
 
Join Date: May 2006
Posts: 295
Default Re: A/F gauge not working

Its not digital, it is a needle, so i wont have "all the blinking light" to annoy me. (i have seen the digital ones and they are annoying.) But anyway I only want to run it to make sure i am not running dead lean. I wanna at least make sure its fluctuating, and not pinned to the floor. o well, mabye it was a waste, but i still wanna get it working...

Thank you 95redex for the help... I will try to tap it there at the ecu.
StinkyFeet is offline  
Old 06-07-2006, 11:14 AM
  #6  
3.0 BAR
 
Join Date: Jan 2006
Posts: 2,044
Default Re: A/F gauge not working

just splice into the o2 sensor. You have to be driving the car to show a reading, or else it will just show a ruch reading and the gauge will not change.
89shithatch is offline  
Old 06-12-2006, 04:25 PM
  #7  
1.0 BAR
Thread Starter
 
Join Date: May 2006
Posts: 295
Default Re: A/F gauge not working

i sent it back today... they said if mine is broke, It'll be the first in that series. so i dunno... I found that it is the White wire on the sensor. I checked someone elses car, and I tested mine on their car.. (didn't work still), but theirs worked on my car.
StinkyFeet is offline  
Old 06-12-2006, 05:04 PM
  #8  
3.0 BAR
 
Join Date: Jan 2006
Posts: 2,044
Default Re: A/F gauge not working

did you drive with the gauge with the engine warm? It must be warmed to read acurately
89shithatch is offline  
Old 06-14-2006, 10:52 AM
  #9  
1.0 BAR
Thread Starter
 
Join Date: May 2006
Posts: 295
Default Re: A/F gauge not working

Originally Posted by 89shithatch
did you drive with the gauge with the engine warm? It must be warmed to read acurately
yea, I had it hooked up for over a week. Thanks tho.
StinkyFeet is offline  
Old 06-14-2006, 01:07 PM
  #10  
0.0 BAR
 
Join Date: Dec 2003
Posts: 0
Default Re: A/F gauge not working

Originally Posted by 89shithatch
did you drive with the gauge with the engine warm? It must be warmed to read acurately
Read accurately.. heh.. I hope that's sarcasm
HondaTuner is offline  

Thread Tools
Search this Thread
Quick Reply: A/F gauge not working


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.