a/f fuel gauge not working!?
#1
a/f fuel gauge not working!?
I went out an bought a autometer a/f ratio gauge for my turbo setup and it doesnt seem to read anything.I have a b16 pwo with 2 o2 sensor hook up but only running 1 o2 and the o2 sensor is a single wire o2. the instructions say run the purple wire to the o2 wire running into ecu and the black to neg. and red to positive. I ran the car for a lil while and it was plenty warmed up it started to read for a lil bit but then stopped. any help would be great.
#6
Re: a/f fuel gauge not working!?
as a narrowband gauge it is pretty useless. it does just as its name says. monitors a very narrow area that is way too lean for a turbo car when running anything more than cruise. but like i said before, you can program a wideband to put out the voltage needed by that narrow band gauge and then it will show correct data and wont be useless, but if you are having trouble hooking it up the right way then i think using it with a wideband is going to be a little over your head