Re: ecu info
any deals coming for your site on ecu's? looks like im gonna need one.
|
Re: ecu info
ok well the ecu i guess is a auto pr5. ive seen some ways to convert ecus from and auto to a manual, but not specifically for the pr5. xeno, any clue?
found that pgmfi.org has a page, but the cache doesnt go that far :3 crap :7 also found this page. http://honda-tech.com/zerothread?id=1275452&page=1 i know, its honda-tech...........but its a resource. i just found this pic and was wondering if it will work. the ecu looks exactly like this one. only difference is that ecu is a pm7 and mines the pr5. same difference correct? http://mycomputerninja.com/~jon/www....toTOmanual.jpg |
Re: ecu info***update***XENOCRON CHECK IN!!!!
TTT FOR AN UPDATE!!!!
|
Re: ecu info***update***XENOCRON CHECK IN!!!!
That picture has an eprom ECU in it.
|
Re: ecu info***update***XENOCRON CHECK IN!!!!
Originally Posted by xenocron
That picture has an eprom ECU in it.
|
Re: ecu info***update***XENOCRON CHECK IN!!!!
28 pins, yes.
carefully remove that 28 pin chip and solder in a DIP socket in its place |
Re: ecu info***update***XENOCRON CHECK IN!!!!
Originally Posted by xenocron
28 pins, yes.
carefully remove that 28 pin chip and solder in a DIP socket in its place Not sure what the ecu guru does on those but I actually remove the chip by cutting it out so I dont have to pull up on the chip when removing it then just use needle nose when the pins get lose to remove them or most f the time they will just fall out by themselves after desoldering |
Re: ecu info***update***XENOCRON CHECK IN!!!!
cool looks like i wont have to buy me an ecu after all. looks like ill toss my pm6 back in and ship this one and probably put a better map on it.
|
All times are GMT -5. The time now is 09:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands