Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

ECU Control USB Cable drivers Not working

Old 10-31-2004, 02:21 PM
  #1  
0.5 BAR
Thread Starter
 
Join Date: Aug 2004
Posts: 67
Default ECU Control USB Cable drivers Not working

So I have the Nokia USB Cable attached & I have a Laptop and I plug in the cable, windows asks for the drivers for it and I point it to the Win9X[me=MNCRXSi]directory and it says it can't find the drivers. So I point it to the XP directory (btw: there is nothing in the Win2K directory) and it installs a driver but it always has the ! next to it in Windows Device Manager. What am I doing wrong?? Why won't it accept the Windows 98 driver[/me]

Pplease help! THanks!!!!
MNCRXSi is offline  
Old 10-31-2004, 04:58 PM
  #2  
3.0 BAR
 
Join Date: Jun 2003
Posts: 3,975
Default Re:ECU Control USB Cable drivers Not working

what os you running?
You got these nokia drivers:
http://www.pgmfi.org/twiki/pub/Home/...s/USBDrive.zip
whiterice is offline  
Old 10-31-2004, 05:12 PM
  #3  
0.5 BAR
Thread Starter
 
Join Date: Aug 2004
Posts: 67
Default Re:ECU Control USB Cable drivers Not working

Those are the drivers I downloaded. I am running Windows 98 Second Edition.
MNCRXSi is offline  
Old 10-31-2004, 05:27 PM
  #4  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re:ECU Control USB Cable drivers Not working

98 and 98SE eat *** for USB support.
SpankedYA! is offline  
Old 10-31-2004, 05:38 PM
  #5  
3.0 BAR
 
Join Date: Jun 2003
Posts: 3,975
Default Re:ECU Control USB Cable drivers Not working

did you try the method from the installation guide

Most of the time, those stupid USB devices need NOT to be plugged in before the setup is ran.

"USB CABLE DRIVER 3.0
Usb Installation Guide
1. Uninstall Old 2303 USB Driver
2. DO NOT plug in the cable.
3. Run the Setup file.
4. Restart the computer after the driver is installed.
5. Plug in the cable.
whiterice is offline  
Old 10-31-2004, 06:07 PM
  #6  
0.5 BAR
Thread Starter
 
Join Date: Aug 2004
Posts: 67
Default Re:ECU Control USB Cable drivers Not working

I agree that Win98/SE suck for USB but its a Intel Celeron 300, I don't know if I want to run Win2K on it.
Anywho, I think I got the drivers to work right, and I got it to go into COM1 (After changing some stuff around) But ECUControl still doesn't display anything....
MNCRXSi is offline  
Old 11-01-2004, 10:07 AM
  #7  
1.5 BAR
 
Join Date: Jun 2003
Posts: 1,404
Default Re:ECU Control USB Cable drivers Not working

Originally Posted by MNCRXSi
I agree that Win98/SE suck for USB but its a Intel Celeron 300, I don't know if I want to run Win2K on it.
Anywho, I think I got the drivers to work right, and I got it to go into COM1 (After changing some stuff around) But ECUControl still doesn't display anything....
you can run win2k on it, I have one like that right now. just dont install the "express" service pack 2. youll be fine. if your performance is too slow you can always adjust some of your "purtyness" settings.
slowcivic is offline  
Old 11-01-2004, 09:28 PM
  #8  
0.5 BAR
Thread Starter
 
Join Date: Aug 2004
Posts: 67
Default Re:ECU Control USB Cable drivers Not working

OK guys when running ECUControl 4 on the system, I connect and when I click on READ ADDRESS on the Numerical tab it says things like FAA.

Does that help? Also I tryed using 5.0 with my NG48 chip and same thing.
MNCRXSi is offline  
Old 11-08-2004, 05:25 PM
  #9  
0.5 BAR
Thread Starter
 
Join Date: Aug 2004
Posts: 67
Default Re:ECU Control USB Cable drivers Not working

OK guys over the weekend I installed Win2K on my laptop (and it does run half way decent, it does have 192 mb ram!) and it still isn't working, but I figured I'd do a screen shot for you guys so you guys can see whats going on.
Lets hope we-todd-did-racnig is going to work out for me here.
Sorry about the size!!!
MNCRXSi is offline  
Old 11-09-2004, 10:46 AM
  #10  
0.5 BAR
Thread Starter
 
Join Date: Aug 2004
Posts: 67
Default Re:ECU Control USB Cable drivers Not working

Its fixed. User error.
MNCRXSi is offline  

Thread Tools
Search this Thread
Quick Reply: ECU Control USB Cable drivers Not working


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.