HomemadeTurbo - DIY Turbo Forum
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   ECU Control USB Cable drivers Not working (https://www.homemadeturbo.com/engine-management-10/ecu-control-usb-cable-drivers-not-working-29111/)

MNCRXSi 10-31-2004 02:21 PM
ECU Control USB Cable drivers Not working
 
So I have the Nokia USB Cable attached & I have a Laptop and I plug in the cable, windows asks for the drivers for it and I point it to the Win9X[me=MNCRXSi]directory and it says it can't find the drivers. So I point it to the XP directory (btw: there is nothing in the Win2K directory) and it installs a driver but it always has the ! next to it in Windows Device Manager. What am I doing wrong?? Why won't it accept the Windows 98 driver???[/me]

Pplease help! THanks!!!!

whiterice 10-31-2004 04:58 PM
Re:ECU Control USB Cable drivers Not working
 
what os you running?
You got these nokia drivers:
http://www.pgmfi.org/twiki/pub/Home/...s/USBDrive.zip

MNCRXSi 10-31-2004 05:12 PM
Re:ECU Control USB Cable drivers Not working
 
Those are the drivers I downloaded. I am running Windows 98 Second Edition.

SpankedYA! 10-31-2004 05:27 PM
Re:ECU Control USB Cable drivers Not working
 
98 and 98SE eat ass for USB support.

whiterice 10-31-2004 05:38 PM
Re:ECU Control USB Cable drivers Not working
 
did you try the method from the installation guide

Most of the time, those stupid USB devices need NOT to be plugged in before the setup is ran.

"USB CABLE DRIVER 3.0
Usb Installation Guide
1. Uninstall Old 2303 USB Driver
2. DO NOT plug in the cable.
3. Run the Setup file.
4. Restart the computer after the driver is installed.
5. Plug in the cable.

MNCRXSi 10-31-2004 06:07 PM
Re:ECU Control USB Cable drivers Not working
 
I agree that Win98/SE suck for USB but its a Intel Celeron 300, I don't know if I want to run Win2K on it.
Anywho, I think I got the drivers to work right, and I got it to go into COM1 (After changing some stuff around) But ECUControl still doesn't display anything....

slowcivic 11-01-2004 10:07 AM
Re:ECU Control USB Cable drivers Not working
 
Originally Posted by MNCRXSi
I agree that Win98/SE suck for USB but its a Intel Celeron 300, I don't know if I want to run Win2K on it.
Anywho, I think I got the drivers to work right, and I got it to go into COM1 (After changing some stuff around) But ECUControl still doesn't display anything....
you can run win2k on it, I have one like that right now. just dont install the "express" service pack 2. youll be fine. if your performance is too slow you can always adjust some of your "purtyness" settings.

MNCRXSi 11-01-2004 09:28 PM
Re:ECU Control USB Cable drivers Not working
 
OK guys when running ECUControl 4 on the system, I connect and when I click on READ ADDRESS on the Numerical tab it says things like FAA.

Does that help? Also I tryed using 5.0 with my NG48 chip and same thing.

MNCRXSi 11-08-2004 05:25 PM
Re:ECU Control USB Cable drivers Not working
 
OK guys over the weekend I installed Win2K on my laptop (and it does run half way decent, it does have 192 mb ram!) and it still isn't working, but I figured I'd do a screen shot for you guys so you guys can see whats going on.
Lets hope we-todd-did-racnig is going to work out for me here.
Sorry about the size!!!
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

MNCRXSi 11-09-2004 10:46 AM
Re:ECU Control USB Cable drivers Not working
 
Its fixed. User error.


All times are GMT -5. The time now is 04:50 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands