ok i cant figure out what is wrong here. i have a chipped ecu and usb datalogging cable from xenocron and i cant get it to datalog for ----. in ecu control it connects and everything but the data i get is way off. like speed says 180 standing still, rpms dont work, etc.

i am using a crome p30 rom with datalogging enabled. am i missing something here?

 

you cut J12 jumper? that was my problem

 

ecu is as it came from xenocron, where do i find j12?

 

on the bottom left about half an inch off the case, left of the two long white things stickin off the board...

 

got it, brb to let you know if it worked

 

ahhh, thanks a million, that fixxed it right up for me.

 

no probem...thats what we are here for...

 

Uberdata = you need J12

Crome/EC/Freelog = J12 needs to be cut

I dont cut it when I chip ECUs because even a noob could get in there and snip it out if they arent using Uberdata...which many people still are.

 

well, im about as n00b as it comes to this engine managment ----.