ecu control datalogging??
 

ok i cant figure out what is wrong here. i have a chipped ecu and usb datalogging cable from xenocron and i cant get it to datalog for ----. in ecu control it connects and everything but the data i get is way off. like speed says 180 standing still, rpms dont work, etc.

i am using a crome p30 rom with datalogging enabled. am i missing something here?

Re: ecu control datalogging??
 

you cut J12 jumper? that was my problem ::)

Re: ecu control datalogging??
 

ecu is as it came from xenocron, where do i find j12?

Re: ecu control datalogging??
 

on the bottom left about half an inch off the case, left of the two long white things stickin off the board...

Re: ecu control datalogging??
 

got it, brb to let you know if it worked

Re: ecu control datalogging??
 

ahhh, thanks a million, that fixxed it right up for me.

Re: ecu control datalogging??
 

no probem...thats what we are here for...

Re: ecu control datalogging??
 

Uberdata = you need J12

Crome/EC/Freelog = J12 needs to be cut

I dont cut it when I chip ECUs because even a noob could get in there and snip it out if they arent using Uberdata...which many people still are.

Re: ecu control datalogging??
 

well, im about as n00b as it comes to this engine managment ----.