98ctr

your uberdata does not touch a good standalone. you don't have near half the tuning points, and you don't have near half the settings an stand alone has.

I sold all my stuff and got a standalone.

obd1 gsr ecu chiped: $150
obd2-obd1 conversion harness $150
apex-i v-afc $300
chip burner $150

total: $750

so for another $100 I got a standalone with handheld commander that display all your sensors, air temp, water temp, boost, inj. duty, ign. timing, rpm, speed, knock, baterry voltage, o2 sensor, boost controll, vtec controll, rev limiter, launch contorll, datalogging etc.

chingro4u

obd1 gsr ecu chiped: $150--------i can beleive
conversion harness $150----------possible, but i still dont beleive
apex-i v-afc $300----------------Point to who bought that, i got a some old rims and worn out tires for $400
chip burner $150------------------depends on what type, I personally spent $70

98ctr

im done, you say what you want, but try to help the guy. help him get the program, chip, socket, burner and all the tuning he needs for $100 since you are so sure he can get that for $100. 98ctr

chingro4u

the apex-i FC is a great unit, I WOULD CHOOSE ONE OVER THE UBERDATA ANYDAY!!!, but i honestly dont have $850 to spend.

98ctr

JUST HELP THE GUY GET HIS CAR ENGINE MANAGEMENT FOR $100 SINCE YOU SAID YOU CAN DO ALL THAT. THEN HE CAN MAKE HIS OWN MIND ON WHAT HE WANTS TO USE.

98ctr

U would if you get your *** up and do something else then argue. You know it all.

chingro4u

ok, listen to yourself, YOU ONLY THINK THAT YOU ARE HELPING HIM.

he came here asking about the GREDDY E-MANAGE, a PIGGYBACK UNIT that cost $400 est.(all harware etc.).
I am telling HIM to get uberdata, it is a free/cheap standalone system with more features, and it is great.

YOU came on, telling him about a standalone systen that cost $850, if the guy had $850 to spend, why the hell is he looking at the GREDDY E-MANAGE

I am only left to assume from what his initial topic was about, that his pocket is only deep enough for the E-manage, and NOT a true standalone unit.




please, dont take this the wrong way, i am only helping him, IF he has $850, then by all means, GET THE APEX-i unit.

chingro4u

HMT has memeber that are willing to help, i will if he wants me to, "streetking" is chipping ECU's for free, and uberdata is a free download. So if he really wants to get it done, it can be done.

I did it for under $100........depending on what he wants to do himself, he can get it done for the same, other than that, it will NOT cost him $400 or $850, i dont see it excceeding $150-$175.

98ctr

thets why I told him about the emanage, as being easy to use, tune and install. It does not have a bunch of other stuff, but it works and its dependablle. Alot easyer then having to take your ecu appart, install zif socket, buy chips, buy burner, download program, figure out how to burn a chip and make a BASE map, them you still have to dyno tune or buy an wideband and tune it your self. But you still have to take out the chip try a new map, which is a lot of trial and error. If you like to do all that and you are handy with ellectornics and soldering, then more power to you, but since he was looking for the e-manage and not at Uberdata then I can only assume that he is looking for the easyest way to get his car working and safely on the road. 98ctr

chingro4u

well if he wants EASI, then Emanage for him
on the other hand
IF he wants STANDALONE, cheaper, not as practical...UBERDATA