Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Engine Management
<<<Do these safc settings sound about right????>>> >

<<<Do these safc settings sound about right????>>>

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

<<<Do these safc settings sound about right????>>>

Old 09-14-2005, 01:46 AM
  #1  
1.5 BAR
Thread Starter
 
Join Date: Jan 2005
Posts: 666
Default <<<Do these safc settings sound about right????>>>

Alright i know every car is different and i need to dyno tune it and use a wideband and ---- but i dont have any of those things right now and i need to know if these setting sound about right for the amount of boost im running?? So if someone knows safc 2 well then help me out. BTW: im using dsm 450s and a 255 walbro pump.

My low throttle setting are about -35 across the board so im leaving those there i think

But my high throttle settings are what worrys me. Im pushing about 9-10 psi max. Here are my settings:

1000rpms 1600 2200 2800 3400 4000 4600 5200 5800 6400 7000
-34 -32 -32 -31 -31 -31 -30 -30 -30 -29 -29


Do those setting sound way too lean for about 9-10psi??



b20accord is offline  
Old 09-14-2005, 01:58 AM
  #2  
3.0 BAR
 
Join Date: Jul 2004
Posts: 3,207
Default Re: <<<Do these safc settings sound about right????>>>

thought u were using uber or te? *** n afc
turboDA6 is offline  
Old 09-14-2005, 02:00 AM
  #3  
1.5 BAR
Thread Starter
 
Join Date: Jan 2005
Posts: 666
Default Re: <<<Do these safc settings sound about right????>>>

Originally Posted by turboDA6
thought u were using uber or te? *** n afc
my ecu aint chippable. Its a pj-0 ecu.
b20accord is offline  
Old 09-14-2005, 10:20 AM
  #4  
1.5 BAR
 
Join Date: Nov 2004
Posts: 1,065
Default Re: <<<Do these safc settings sound about right????>>>

if it's obd1, just use a po6. anyway, it's kinda hard to tell if that's gonna be too lean or not. just hook it up to a wideband
darksol2005 is offline  
Old 09-14-2005, 11:53 AM
  #5  
3.0 BAR
 
Join Date: Jul 2004
Posts: 3,207
Default Re: <<<Do these safc settings sound about right????>>>

Originally Posted by b20accord
Originally Posted by turboDA6
thought u were using uber or te? *** n afc
my ecu aint chippable. Its a pj-0 ecu.
what kinda ------ excuse is that adam ahaha. get another ecu that is n chip the bitch... dont gay out on management. afc hack is whack its a proven fact, so get with the program, get a new ecu before u motor is thru
turboDA6 is offline  
Old 09-14-2005, 05:18 PM
  #6  
3.0 BAR
 
Join Date: Jan 2003
Posts: 4,403
Default Re: <<<Do these safc settings sound about right????>>>

your settings should be just fine @ 10PSI. dont boost more that that though.

i would run -45 on my low settings then -30 for my high. i set my low throttle point at 10% high at 13% this way you have some type of fuel economy.
RENR is offline  
Old 09-14-2005, 06:41 PM
  #7  
1.5 BAR
Thread Starter
 
Join Date: Jan 2005
Posts: 666
Default Re: <<<Do these safc settings sound about right????>>>

alright cool thanks rene. Im not planning to push more then that on this engine. I have my high throttle set at 35% and my low is at 34%. So you think i should turn my low throttle setting down some?? It will boost below 34% throttle depending on what gear im in. I had my setting turned up alot because with the ecu i was running my car seemed to run lean when i was n/a.
b20accord is offline  
Old 09-14-2005, 06:43 PM
  #8  
1.5 BAR
Thread Starter
 
Join Date: Jan 2005
Posts: 666
Default Re: <<<Do these safc settings sound about right????>>>

Originally Posted by turboDA6
Originally Posted by b20accord
Originally Posted by turboDA6
thought u were using uber or te? *** n afc
my ecu aint chippable. Its a pj-0 ecu.
what kinda ------ excuse is that adam ahaha. get another ecu that is n chip the bitch... dont gay out on management. afc hack is whack its a proven fact, so get with the program, get a new ecu before u motor is thru
lol, i would but i have no idea how i would wire up the other ecu and which distributer to use etc...
b20accord is offline  
Old 09-14-2005, 07:10 PM
  #9  
3.0 BAR
 
Join Date: Jan 2003
Posts: 4,403
Default Re: <<<Do these safc settings sound about right????>>>

Originally Posted by b20accord
alright cool thanks rene. Im not planning to push more then that on this engine. I have my high throttle set at 35% and my low is at 34%. So you think i should turn my low throttle setting down some?? It will boost below 34% throttle depending on what gear im in. I had my setting turned up alot because with the ecu i was running my car seemed to run lean when i was n/a.
ya thats why i set the throttle percentage low. try it see you like it. the more of a gap you have between the low and high the smoother the transition will be.
RENR is offline  
Old 09-15-2005, 12:12 AM
  #10  
1.5 BAR
Thread Starter
 
Join Date: Jan 2005
Posts: 666
Default Re: <<<Do these safc settings sound about right????>>>

Originally Posted by RENR
Originally Posted by b20accord
alright cool thanks rene. Im not planning to push more then that on this engine. I have my high throttle set at 35% and my low is at 34%. So you think i should turn my low throttle setting down some?? It will boost below 34% throttle depending on what gear im in. I had my setting turned up alot because with the ecu i was running my car seemed to run lean when i was n/a.
ya thats why i set the throttle percentage low. try it see you like it. the more of a gap you have between the low and high the smoother the transition will be.
alright bro, i see what you mean. Ill mess around with the settings tommrow. So You think i should turn down my low throttle settings to somewhere around -40? My car at low speeds some times wants to jerk kinda until i get on the gas alittle more. Im thinking this might be because of it runnning to rich in the low throttle settings?
b20accord is offline  

Thread Tools
Search this Thread
Quick Reply: <<<Do these safc settings sound about right????>>>


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.