Re: datalogging problems
 

where is j12 located on the ecu? pictures??? thanks

Re: datalogging problems
 

Your faggot ass really doesn't know how to search, after how many posts?

You are the perma-n00b.

If clicking the search button is against your religion, then Look at your ECU for 1 minute and you will find J12

Re: datalogging problems
 

You guys should get a room... ;D

Re: datalogging problems
 

still cant get it to work. and no j12 is not easy to ------- see. the resistor was smaller than jackoff's dick. so i had to whip out the microscope - found it and took it out, pluged in cable to compy, started up car = NOTHING. could it be that datalogging was not activated on the ecu when the chip was burned? thanks

Re: datalogging problems
 

are you trying to datalog with crome?? if you are its never going to work being that it doesnt have the feature built in. i have not datalogged myself but i would search on pgmfi to get the necessary steps. jago lay off him clearly you messed up too ;)

Re: datalogging problems
 

no acutally u are the one who messed up. with the uberdata you have dont have to cut the j12 resistor because yes it is already built in to read it. but with crome all you have to do is cut the j12 and hook it up and you should be good. i already talked to xenocron or watever and he even said they come with uberdata. :1

Re: datalogging problems
 

what are you talking about? i was talking about crome ::)

Re: datalogging problems
 

:1

Re: datalogging problems
 

since when can you datalog with the free crome?? i know you can datalog with crome pro and gooberdata ::)

Re: datalogging problems
 

the chip has to be burned with a map made in crome.