datalogging problems
 

yes i have searched but couldnt find, so dont flame.

well i installed crome and it is ------- fast at only 7psi. but i want to know what is going on in my motor with the datalogging and i cant figure it out. i i i cant figure out what program to use 1. for the usb connector i have, and 2. for the datalogging.

i got a program called ECUcontrol and i cant figure out how to get a live reading from my datalogging cable from my ecu.

need help thanks

Re: datalogging problems
 

bumb....come on...no one here knows how to datalog?

Re: datalogging problems
 

You are a dumb sack of ---- once again.

You are using Crome.... so that is the program you use to datalog.

If you are using a serial->USB adaptor then google for drivers. I'm not even gonna tell you where they are if you can't find them.

I also thought you might be hungry... so here ya go

http://www.homegrocer.com/images/pro...am%20gravy.gif

Re: datalogging problems
 

i have a usb driver program i just need to figure out how to get a live feed from the car.

Re: datalogging problems
 

You plug in your datalogging cable, turn the car on, BAM you got a live feed

Re: datalogging problems
 

I don't think the free version offers datalogging. I guess for that you have to use ECU Control.

I also thought there was a slight difference in hardware setup for Uber & Crome. If you're using an Uber ECU, there's some kind of jumper change, but I don't know what it is.

Good luck. :8

Re: datalogging problems
 

no jack off it doesnt do that, hense me posting dumbass

someone once said something about cutting a jumper wire or something like number j12 or some ----. is that what you are talking about? i have no idea where that is. HELP!!! :S

Re: datalogging problems
 

yes for all datalogging except for uber, you have to cut or remove Jumper at J12.

Try using Cuddle for datalogging. It is on the PGMFI.org forum. John wrote that as well I believe.

If you want datalogging integrated into the program try uberdata.

Re: datalogging problems
 

Then you fucked something up, or assuming it's you, DIDN'T READ THE FAQS.

You are a scab, a disease on this society we know as HMT. Go fist your grandma, it'd be more productive than anything you do to your car.

Re: datalogging problems
 

another retarded and illogical response from our very own JACKOFF

Re: datalogging problems
 

where is j12 located on the ecu? pictures??? thanks

Re: datalogging problems
 

Your faggot ass really doesn't know how to search, after how many posts?

You are the perma-n00b.

If clicking the search button is against your religion, then Look at your ECU for 1 minute and you will find J12

Re: datalogging problems
 

You guys should get a room... ;D

Re: datalogging problems
 

still cant get it to work. and no j12 is not easy to ------- see. the resistor was smaller than jackoff's dick. so i had to whip out the microscope - found it and took it out, pluged in cable to compy, started up car = NOTHING. could it be that datalogging was not activated on the ecu when the chip was burned? thanks

Re: datalogging problems
 

are you trying to datalog with crome?? if you are its never going to work being that it doesnt have the feature built in. i have not datalogged myself but i would search on pgmfi to get the necessary steps. jago lay off him clearly you messed up too ;)

Re: datalogging problems
 

no acutally u are the one who messed up. with the uberdata you have dont have to cut the j12 resistor because yes it is already built in to read it. but with crome all you have to do is cut the j12 and hook it up and you should be good. i already talked to xenocron or watever and he even said they come with uberdata. :1

Re: datalogging problems
 

what are you talking about? i was talking about crome ::)

Re: datalogging problems
 

:1

Re: datalogging problems
 

since when can you datalog with the free crome?? i know you can datalog with crome pro and gooberdata ::)

Re: datalogging problems
 

the chip has to be burned with a map made in crome.