B16MIKE

ok, i am using t.e. with pm6 on b16 in a 90 teg.car is idling from 800-1000 up and down.i am using 450cc,t3/t4,my base map is good but do i need to keep correcting the boost option table? i have it set at 116% do i go up or down with the numbers to get a stable idle?

bulldogg9279

the boost option shouldnt effect your idle; what bin are you using

B16MIKE

the stable ng26.

beater

Unplug your ecu to reset it. Start the car up and let it idle down and warm up on its own with NO accesories on. The computer needs to figure itself out.

-Nick

T-RO

lucky you, my car is idling at like 2500-3000 after turbo install

88crxSi

that means you have a vac leak somewhere.

B16MIKE

ok, i re-set the ecu and it did alot better but still tries to doit but i turned the idle adjusting screw on the TB and it flatened out. i need more tunning on the ignition part of T.E. thanks for the reponses.