Can't use DSM 390cc on my manual accord?
05-13-2003, 02:04 PM
#1
0.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 43
Can't use DSM 390cc on my manual accord?
Hi all,
I just spoke to someone that said that I can't use the DSM 380/90 cc injectors (auto talon injectors) on my manual accord? He said I could blow up my engine and that I need to get the 450cc's (map sensor hack only doable with 450cc)? Can anyone validate this?
This is important cuz I only have the gen 1 5 dial AFC which can only control up to -30% which I already installed, and I have the 390cc injector ready?
Please help me figure this out so I can quickly decide if need the newer AFC and 450cc's. I hope it's not true.....
Thanks
I just spoke to someone that said that I can't use the DSM 380/90 cc injectors (auto talon injectors) on my manual accord? He said I could blow up my engine and that I need to get the 450cc's (map sensor hack only doable with 450cc)? Can anyone validate this?
This is important cuz I only have the gen 1 5 dial AFC which can only control up to -30% which I already installed, and I have the 390cc injector ready?
Please help me figure this out so I can quickly decide if need the newer AFC and 450cc's. I hope it's not true.....
Thanks
05-13-2003, 02:17 PM
#2
0.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 43
Re:Can't use DSM 390cc on my manual accord?
Ok, I think I've found someone using the 390cc's on his manual accord with no problems...Just waiting on him to get back to me and verify...I wouldn' t think there would be a problem as both are P&H right? Hopefully that guy I spoke to is off on this b/c I don' t see a reason why not...
Any insight would be great.thx
Curtis
Any insight would be great.thx
Curtis
05-13-2003, 05:07 PM
#6
0.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 43
Re:Can't use DSM 390cc on my manual accord?
ok I heard back from Jon, he said he's went with the 450cc! So I'm back to square 1...does anyone think or know of why I would not be able to use the 390 cc Auto DSM injectors on my F22a accord?
Thanks
Thanks
05-14-2003, 12:05 PM
#8
0.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 43
Re:Can't use DSM 390cc on my manual accord?
Yeah, I call 'BS' on what that guy told me, I'm going to try install the injectors today (w/o turbo) and try tune with AFC...I really can't see why it wouldn't work.
I'll let you know if I encounter any problems.
Thx
I'll let you know if I encounter any problems.
Thx
05-15-2003, 09:13 PM
#9
0.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 43
Re:Can't use DSM 390cc on my manual accord?
Yeah, got the 390cc injectors in... All is working good...turbo is not in yet, but to adjust the flow now I've got it set. As 91AccordLX mentioned, b/c of accords larger displacement (vs civic), we have to run a little richer... These are my AFC settings w/o the turbo in:
800RPM : -12%
2400RPM : -18%
4000RPM : -18%
5000RMP : -18%
7000RMP : 0 (won't go past this)
I may be running richer than need be but the drivability is fine, I'll have to see about fuel milage. I've just got to get a couple more things before the actual instal
800RPM : -12%
2400RPM : -18%
4000RPM : -18%
5000RMP : -18%
7000RMP : 0 (won't go past this)
I may be running richer than need be but the drivability is fine, I'll have to see about fuel milage. I've just got to get a couple more things before the actual instal
Thread
Thread Starter
Forum
Replies
Last Post
95civicLX
Hybrid/Tech
2
10-25-2005 07:50 PM
