Can I use a auto ecu to run my 5 speed?
Thread Starter
0.0 BAR
Joined: Jan 2006
Posts: 0
From: Mother Fucking Washingtion
Can I use a auto ecu to run my 5 speed?
SO im going obd-1. Ive got the diz. the obd0 to obd1 jumperharnes, and the o2 senc. Now im looking at getting the ecu. Im running a built b18a. So my big ? is can I use a auto ecu even though I dont have a auto?
0.0 BAR
Joined: Feb 2003
Posts: 0
Re: Can I use a auto ecu to run my 5 speed?
Auto and manual ECU are the same thing, right down to the tune, only auto ECUs have a few more parts.
What you need to do is look right below the silkscreen where the chip goes, it's the bottom right when you hold the ECU with the plugs in your left hand, and there are a series of RPxx jumpers there. What you need to do is remove RP17 entirely, and replace RP18 with a piece of jumper wire.
What you need to do is look right below the silkscreen where the chip goes, it's the bottom right when you hold the ECU with the plugs in your left hand, and there are a series of RPxx jumpers there. What you need to do is remove RP17 entirely, and replace RP18 with a piece of jumper wire.
Thread
Thread Starter
Forum
Replies
Last Post
95civicLX
Hybrid/Tech
2
Oct 25, 2005 07:50 PM
