Can all 92-95 Civic non-VTEC ECUs be converted to VTEC?
#1
Can all 92-95 Civic non-VTEC ECUs be converted to VTEC?
it says 94-95 and list certian board numbers. do 92-93 not work and are these all the boards there are or are some boards not convertable
http://www.pgmfi.org/twiki/bin/view/...onVtec-To-Vtec
In most cases, it is relatively simple to convert non-vtec ECUs to Vtec. The same PCB was used in several ECUs, with components added or left off as needed. Look for a part number like "02D011F0-1500" which was used in many 94-95 Civic ECUs. In many cases, you might need to look at One Wire To4 Wire O2 Sensor or Auto To Manual as well.
Conversion for 02 D01720-1500 boards
Conversion for 02 D011 F0-1500 boards
Conversion for 02 D01980-1500 boards
---------------------------------------------------
on a side not what is different from sohc and dohc ecus' or what is required to convert sohc ecu to dohc?
-components for knock monitoring?
-for secondary runner?
http://www.pgmfi.org/twiki/bin/view/...onVtec-To-Vtec
In most cases, it is relatively simple to convert non-vtec ECUs to Vtec. The same PCB was used in several ECUs, with components added or left off as needed. Look for a part number like "02D011F0-1500" which was used in many 94-95 Civic ECUs. In many cases, you might need to look at One Wire To4 Wire O2 Sensor or Auto To Manual as well.
Conversion for 02 D01720-1500 boards
Conversion for 02 D011 F0-1500 boards
Conversion for 02 D01980-1500 boards
---------------------------------------------------
on a side not what is different from sohc and dohc ecus' or what is required to convert sohc ecu to dohc?
-components for knock monitoring?
-for secondary runner?
#2
Re:Can all 92-95 Civic non-VTEC ECUs be converted to VTEC?
it's all covered on the wiki.
Adding the knock monitoring components probably isn't a viable solution at this point, but disabling the knock sensor in the ROMs is relatively easy at this point.
Adding IAB control is covered on the wiki.
Adding the knock monitoring components probably isn't a viable solution at this point, but disabling the knock sensor in the ROMs is relatively easy at this point.
Adding IAB control is covered on the wiki.
Thread
Thread Starter
Forum
Replies
Last Post
whiterice
Turbo Parts For Sale
4
01-04-2007 11:15 PM
freakaccident
Engine Management
21
04-17-2005 02:24 AM