BRE extra tables
#4
Re: BRE extra tables
^ your not using a ng60 or 61 bin right? cause I have the latest version too and it only works with the vtec bins.
Someone was saying how obd0 doesn't compensate for temp. change. which I never really thought about. though when it gets cold, colds starts suffer. I was messing with TE and in the properties under fuel pressure it says something like adjust fuel pressure internally for cold starts. I've never adjusted that. Has anyone increased the fuel pressure for cold starts I was wondering too if the pr3 vtec bin would work on a pm6
Someone was saying how obd0 doesn't compensate for temp. change. which I never really thought about. though when it gets cold, colds starts suffer. I was messing with TE and in the properties under fuel pressure it says something like adjust fuel pressure internally for cold starts. I've never adjusted that. Has anyone increased the fuel pressure for cold starts I was wondering too if the pr3 vtec bin would work on a pm6
#5
Re: BRE extra tables
Ya I just hit open on the top left and picked a bin. I see what you mean now ng60 no extra features.
I know when you adjust the fuel pressure In turboedit it will not change your fuel map like when you adjust map sizing, fuel multiplier, injector sizing. So you can mess with it and see what happens.
I thought most obdo used the fast idle thermo valve due to no programming for cold starts. I don’t know if a pm3bin will work with a pm6 maybe if you shut of vtec.
You may just try setting your idle a bit higher to help keep it running cold.
Sorry I have not tested bre a lot at this time.
I know when you adjust the fuel pressure In turboedit it will not change your fuel map like when you adjust map sizing, fuel multiplier, injector sizing. So you can mess with it and see what happens.
I thought most obdo used the fast idle thermo valve due to no programming for cold starts. I don’t know if a pm3bin will work with a pm6 maybe if you shut of vtec.
You may just try setting your idle a bit higher to help keep it running cold.
Sorry I have not tested bre a lot at this time.
#6
Re: BRE extra tables
Originally Posted by fuse
Ya I just hit open on the top left and picked a bin. I see what you mean now ng60 no extra features.
I know when you adjust the fuel pressure In turboedit it will not change your fuel map like when you adjust map sizing, fuel multiplier, injector sizing. So you can mess with it and see what happens.
I thought most obdo used the fast idle thermo valve due to no programming for cold starts. I don’t know if a pm3bin will work with a pm6 maybe if you shut of vtec.
You may just try setting your idle a bit higher to help keep it running cold.
Sorry I have not tested bre a lot at this time.
I know when you adjust the fuel pressure In turboedit it will not change your fuel map like when you adjust map sizing, fuel multiplier, injector sizing. So you can mess with it and see what happens.
I thought most obdo used the fast idle thermo valve due to no programming for cold starts. I don’t know if a pm3bin will work with a pm6 maybe if you shut of vtec.
You may just try setting your idle a bit higher to help keep it running cold.
Sorry I have not tested bre a lot at this time.
I'm going to do some tuning tomorrow and mess with the internal fuel pressure. For cold start, it's not just the idle but increase the a/f mixture. raising the idle isn't going to do that. you need cold start enrichment.
Thread
Thread Starter
Forum
Replies
Last Post
b16crex
Engine Management
3
08-02-2006 11:13 PM
HMT-Admin
Forced Induction
0
08-01-2006 12:25 PM
Dr.Boost
General Discussion
9
07-11-2004 05:51 PM