Re: Blinking CEL
You can't just order an ECU. OBDI would require a conversion harness and a 2 WIRE IAC. You need to do some research.
|
Re: Blinking CEL
I know this.
|
Re: Blinking CEL
do you have any extra O2 sensor lying around? When i had my hack it fouled out my O2 sensor an caused a rediculous misfire, swapped out the o2, gapped my plugs down and it was good till i was able to get crome
|
Re: Blinking CEL
Cant I just clean the o2 sensors. I dnt have any lying around. The o2 sensor closer to the turbo is fouled with spark plug foulers.
|
Re: Blinking CEL
Ok I think I got it. After I ordered the ecu from xenocron and the fuel pump and the new IM, I realised almost all of my resistors had broken off the wires. My tuner attached them to the fuel rail, it was just waiting for the vibrations to break it. That might of been the reason for the misfires. Blahhh. :6
|
Re: Blinking CEL
Originally Posted by Birdley42008
Ok I think I got it. After I ordered the ecu from xenocron and the fuel pump and the new IM, I realised almost all of my resistors had broken off the wires. My tuner attached them to the fuel rail, it was just waiting for the vibrations to break it. That might of been the reason for the misfires. Blahhh. :6
|
Re: Blinking CEL
havent finished the build yet.
|
Re: Blinking CEL
so how is you car running'?
|
Re: Blinking CEL
AFC ftl, Crome ftl, Hondata S100 ftw! Now its my internally gated Ford T3 starting to ---- the bed. I need tires, turbo, and external wastegate.
|
Re: Blinking CEL
run a resistor box i ran inlines 1 snaped and while i was racing and it cracked my ching chong manifold
|
All times are GMT -5. The time now is 07:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands