HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Basemap help (https://www.homemadeturbo.com/engine-management-10/basemap-help-62926/)

z1guy 06-12-2006 09:45 PM

Re: Basemap help
 
well, every setup is differant, every motor is of a differant condition, and there are differant climates etc all over the US and canada, so a basemap is nothing more than a way of getting a car running in order to tune. theres no way to know if it will be very safe, or not safe at all. some people will make them very safe which is good if you are going straight to a tuner, and some will try to get it close to perfect by guessing, which can lead to problems. a basemap should never be used to run a car w/out the understanding that its not meant to run the car efficiently or for any period of time.

primed16 06-12-2006 11:07 PM

Re: Basemap help
 
alright i understand now..In tuning with crome which is what im going with if you understand the concept of turbos and engines etc. is using the crome to tune difficult or pretty user friendly ??...one more question what would you guys suggest for a good inexpensive wideband..??

z1guy 06-12-2006 11:38 PM

Re: Basemap help
 
well, if you have no experience, and dont know how to read maps, and know proper a/f ratios, and timing curves, its not a great idea to do it yourself w/ out someone watching over you to make sure you dont kill it on the first pull.

FooK 06-13-2006 12:06 AM

Re: Basemap help
 

Originally Posted by noboostedEGo
For a stock z6 motor you might want your vtec engagement a little lower than 5400-5800.

------- A.

i ran mine from 4500-4800.

primed16 06-13-2006 12:17 AM

Re: Basemap help
 
yea i understand there is no way i would even attempt to do it myself...im just asking to learn the program is it pretty user friendly or is all the steps pretty complicated etc...

z1guy 06-13-2006 09:35 AM

Re: Basemap help
 

Originally Posted by FooK
------- A.

i ran mine from 4500-4800.

well, on a basemap i wouldnt. i mean, if i intended on driving on it i would, but just a basemap to get it to the tuner, honestly i wouldnt even hit vtec, so i used the stock setting.

primed16 06-13-2006 10:39 PM

Re: Basemap help
 
Sounds good to me I dont want to blow it up before i get to have some fun....how much power are these motors typically putting down with the setup im going with..done right that is ?

z1guy 06-13-2006 10:59 PM

Re: Basemap help
 
tuned you should see anywhere from 150-190whp on 7psi.... good luck, and by the way, TQ is what will make it fun, not the HP.

primed16 06-14-2006 08:01 PM

Re: Basemap help
 
Whats the good luck for dont think it can be done or just hard getting there ?

z1guy 06-14-2006 08:21 PM

Re: Basemap help
 
nah man, good luck as in "good luck" hope nothing goes wrong, and it all works out. not a "good luck" as in it will never happen.


All times are GMT -5. The time now is 12:55 PM.


© 2024 MH Sub I, LLC dba Internet Brands