bad chip?
#1
bad chip?
I have a chipped 90 pm6 and when i plug it in my main realay kicks on but my fuel pump does not. no cell codes or anything. and when i plug in my 88 si ecu my fuel pump kicks on and the car starts right up. so is there something wrong with my chip or is my 90 si ecu blown
second problem is when i use the williem chip burner it does not id the chip. but at the bottom of the screen it says hardware present. i use at29c256 chips is this normal
second problem is when i use the williem chip burner it does not id the chip. but at the bottom of the screen it says hardware present. i use at29c256 chips is this normal
#7
Re: bad chip?
Originally Posted by jagojon3
About the Willem, when it says hardware present that just means that the computer is connected to the BURNER, it will give you that message with or without a chip in there.
When I had a bad chip it just gave me a solid CEL.
When I had a bad chip it just gave me a solid CEL.
<- hoping a bad chip is the extent of my problems.
#8
Guest
Posts: n/a
Re: bad chip?
Originally Posted by JFoster
Originally Posted by jagojon3
About the Willem, when it says hardware present that just means that the computer is connected to the BURNER, it will give you that message with or without a chip in there.
When I had a bad chip it just gave me a solid CEL.
When I had a bad chip it just gave me a solid CEL.
<- hoping a bad chip is the extent of my problems.
#10
Re: bad chip?
Originally Posted by jagojon3
Originally Posted by JFoster
Originally Posted by jagojon3
About the Willem, when it says hardware present that just means that the computer is connected to the BURNER, it will give you that message with or without a chip in there.
When I had a bad chip it just gave me a solid CEL.
When I had a bad chip it just gave me a solid CEL.
<- hoping a bad chip is the extent of my problems.