Has anyone got any instructions on how to fit one of there darn things?

I got no instructions with it and i just cant work it out!

Thanks Matt

 

a google search came up with this:

http://www.prostreetonline.com/pso/p...p?articleid=10

it's not the instructions, but should point you in the right direction.

 

beat me to it....

 

I got the instructions but I dont have a scanner. but
remove the your factory fpr, put the stocpr in a vise without crushing it,cut the head(the part with vacuum conector) off the the head with an hachsaw leaving a 1/4 in smooth it with a file, installed oring from b&m, assemble the b&m assembly to the cutoff factory fpr using the supplied loct tight on the screws,it is pretty much self explanatory after you cut the head off the stock one. I cant give all, its too much, I think this should help.if this does not help I will find a place where I can asan it. its easy! I did mine without even looking at instructions,

 

its fitted now, i found the instructions in the packet!!!!
What a retard i am sometimes!

 

I was about to ask if it did not have the instruction with it. but you I guess you are good now.