B&M fuel pressure regulator
Has anyone got any instructions on how to fit one of there darn things? :'(
I got no instructions with it and i just cant work it out! :-[ Thanks Matt |
Re:B&M fuel pressure regulator
a google search came up with this:
http://www.prostreetonline.com/pso/p...p?articleid=10 it's not the instructions, but should point you in the right direction. |
Re:B&M fuel pressure regulator
Originally Posted by bobski
a google search came up with this:
http://www.prostreetonline.com/pso/p...p?articleid=10 it's not the instructions, but should point you in the right direction. |
Re:B&M fuel pressure regulator
I got the instructions but I dont have a scanner. but
remove the your factory fpr, put the stocpr in a vise without crushing it,cut the head(the part with vacuum conector) off the the head with an hachsaw leaving a 1/4 in smooth it with a file, installed oring from b&m, assemble the b&m assembly to the cutoff factory fpr using the supplied loct tight on the screws,it is pretty much self explanatory after you cut the head off the stock one. I cant give all, its too much, I think this should help.if this does not help I will find a place where I can asan it. its easy! I did mine without even looking at instructions, |
Re:B&M fuel pressure regulator
its fitted now, i found the instructions in the packet!!!! :-[
What a retard i am sometimes! |
Re:B&M fuel pressure regulator
I was about to ask if it did not have the instruction with it. but you I guess you are good now.
|
All times are GMT -5. The time now is 01:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands