Alternative tuning tools?
#1
Alternative tuning tools?
http://scirocco.dyndns.org/tech/misc/afgauge/af.html wb o2 meter?
I found this on pgmfi.org
any advice/suggestions on what is need for the wb02 meter wo work with a l1h1?
it seems like a cheap and effective way to monitor lean or rich conidtions(going to 12.1), any additional info would be appreciated.
I found this on pgmfi.org
any advice/suggestions on what is need for the wb02 meter wo work with a l1h1?
it seems like a cheap and effective way to monitor lean or rich conidtions(going to 12.1), any additional info would be appreciated.
#6
Re:Alternative tuning tools?
You _cannot_ convert a narrow O2 sensor to read as a wideband.
The narrowband O2 sensor's voltage range is only 0-1v, and it's a non-linear voltage. It's got two MASSIVE voltage sweeping curves and two "flat lines".
Completely worthless for widespectrum... thus, it's "narrowband" name.
The narrowband O2 sensor's voltage range is only 0-1v, and it's a non-linear voltage. It's got two MASSIVE voltage sweeping curves and two "flat lines".
Completely worthless for widespectrum... thus, it's "narrowband" name.
#9
Re:Alternative tuning tools?
a l1h1 has what 4 wires right? I keep hearing about a narrowband wire, how do I totally replace my single wire narrow band with the wideband? Do I replace the sensor and run the narrowband wire from the sensor to the regular o2 output?
then from there I use the other three or four wires to go to a meter? enlighten me please.
then from there I use the other three or four wires to go to a meter? enlighten me please.
#10
Re:Alternative tuning tools?
A lot of the WBO2 *KITS* come with two outputs, a narrowband output, and a wideband output.
You can use the narrowband output to run from the WB controller, to the ECU directly, and it will run off of your WBO2 sensor.
This is not for tuning, this is so you dn'thave to run a second O2 bung.
Not to forget, that when I did this with my PLX, my gas milage increased!
It's a scaled version of the 0-5v... anyway.. ya.
You can use the narrowband output to run from the WB controller, to the ECU directly, and it will run off of your WBO2 sensor.
This is not for tuning, this is so you dn'thave to run a second O2 bung.
Not to forget, that when I did this with my PLX, my gas milage increased!
It's a scaled version of the 0-5v... anyway.. ya.