AFC + WB O2 sensor
01-23-2006, 06:41 PM
#2
Guest
Posts: n/a
Re: AFC + WB O2 sensor
If you use everything you listed, including the wideband controller, that will be fine for fuel management.
It is absolutely pointless to have a WB O2 sensor without the controller, it won't give you any usable data. Most people just buy a kit that includes the controller and sensor. Zeitroniz, PLX, Innovate all carry such kits.
It is absolutely pointless to have a WB O2 sensor without the controller, it won't give you any usable data. Most people just buy a kit that includes the controller and sensor. Zeitroniz, PLX, Innovate all carry such kits.
01-23-2006, 06:48 PM
#3
0.5 BAR
Thread Starter
Join Date: Aug 2005
Posts: 187
Re: AFC + WB O2 sensor
i was hoping to not have to buy the controller, and just use a WB o2 sens and a A/f gauge hooked on it. so i can read some a/f data and look @ my rpm. aftherall you can calculate your basic settings for an afc. (the %, like idle with 450cc -38%)
01-23-2006, 07:24 PM
#4
Guest
Posts: n/a
Re: AFC + WB O2 sensor
Originally Posted by taiajam
i was hoping to not have to buy the controller, and just use a WB o2 sens and a A/f gauge hooked on it.
01-24-2006, 03:00 AM
#5
0.5 BAR
Thread Starter
Join Date: Aug 2005
Posts: 187
Re: AFC + WB O2 sensor
does this controller have a display? or do i need to hookup my laptop on it?
so basiclly if you have a wbo2 sens+controller, your just a little step away from chipping? so a afc would be a waste of money?
so basiclly if you have a wbo2 sens+controller, your just a little step away from chipping? so a afc would be a waste of money?
01-24-2006, 04:02 AM
#6
0.5 BAR
Thread Starter
Join Date: Aug 2005
Posts: 187
Re: AFC + WB O2 sensor
Originally Posted by taiajam
does this controller have a display? or do i need to hookup my laptop on it?
so basiclly if you have a wbo2 sens+controller, your just a little step away from chipping? so a afc would be a waste of money?
so basiclly if you have a wbo2 sens+controller, your just a little step away from chipping? so a afc would be a waste of money?
the gauge is for reading how rich? so i if its to rich at
ets say 4000 rpm, than i can adjust this in my afc... etc...
01-24-2006, 08:03 AM
#7
Guest
Posts: n/a
Re: AFC + WB O2 sensor
Originally Posted by taiajam
is it not possible to just calculate the settings for an AFC setup, and have a WB sensor without a controller, an A/f guage hookedup directly on the wb sensor?
the gauge is for reading how rich? so i if its to rich atets say 4000 rpm, than i can adjust this in my afc... etc...
the gauge is for reading how rich? so i if its to rich at
ets say 4000 rpm, than i can adjust this in my afc... etc...
01-25-2006, 12:44 AM
#9
Guest
Posts: n/a
Re: AFC + WB O2 sensor
Originally Posted by taiajam
ok so lets say if i dont use a WB, but a narrowband + a/f gauge wil this be enough for reading my a/f? and IF its to rich i can adjust some shizzle in my afc?
If that was the case, why the ---- would everybody be spending hundreds of dollars on wideband setups?
