AFC + WB O2 sensor
 

can i use bigger injectors, afc, WB lambdasensor for my fuelmanagement? D16z2 sohc

or do i need a wideband controller?(zeitronix) and what does this controller actually do?

plz help?!!

Re: AFC + WB O2 sensor
 

If you use everything you listed, including the wideband controller, that will be fine for fuel management.

It is absolutely pointless to have a WB O2 sensor without the controller, it won't give you any usable data. Most people just buy a kit that includes the controller and sensor. Zeitroniz, PLX, Innovate all carry such kits.

Re: AFC + WB O2 sensor
 

i was hoping to not have to buy the controller, and just use a WB o2 sens and a A/f gauge hooked on it. so i can read some a/f data and look @ my rpm. aftherall you can calculate your basic settings for an afc. (the %, like idle with 450cc -38%)

Re: AFC + WB O2 sensor
 

Like I said, you need to have a controller in order to get any usable data from your WB O2. Ya dig?

Re: AFC + WB O2 sensor
 

does this controller have a display? or do i need to hookup my laptop on it?
so basiclly if you have a wbo2 sens+controller, your just a little step away from chipping? so a afc would be a waste of money?

Re: AFC + WB O2 sensor
 

is it not possible to just calculate the settings for an AFC setup, and have a WB sensor without a controller, an A/f guage hookedup directly on the wb sensor?
the gauge is for reading how rich? so i if its to rich at:lets say 4000 rpm, than i can adjust this in my afc... etc...

Re: AFC + WB O2 sensor
 

YOU NEED THE CONTROLLER

Re: AFC + WB O2 sensor
 

ok so lets say if i dont use a WB, but a narrowband + a/f gauge wil this be enough for reading my a/f? and IF its to rich i can adjust some shizzle in my afc?

Re: AFC + WB O2 sensor
 

NO.

If that was the case, why the ---- would everybody be spending hundreds of dollars on wideband setups? ::)

Re: AFC + WB O2 sensor
 

oh ok i understand now.

but what do i need to change in my afc for settings? if i use 450cc injectors